10 Pieces 222-418 Electrical Connection Terminals with 8 Control Levers for Quick and Secure Wiring

[16 Anti-Slip Hooks] The storage hook is made of ABS material, which is rust-free, sturdy, waterproof, moisture-resistant, and corrosion-resistant. There are enough screws to ensure stability. Each rail is 16 inches long, and a total of four rails measure 64 inches. Each hook has a non-slip vinyl-coated pin to prevent items from falling.
[Load Capacity] Tool organizer with a high load capacity. The plastic pins and 5-shaped metal hooks can hold up to 8 lbs (3.6 kg) and 15 lbs (6.8 kg) when properly installed.
[Space Saving] The 5-shaped metal hook design can hang various tools, such as rakes, shovels, brooms, mops, and any tools with handles. The plastic hook can hang rags, wires, cleaning supplies, etc. Save space and keep your kitchen, garage, and workshop tidy.
[Package] 4 x 16-inch ABS rails, 16 galvanized steel hooks, with non-slip vinyl-coated pins, 20 pins, 4 connectors, 4 wall rail mounting holes, 20 screws, 20 pins. It is recommended to use a concrete or wooden wall for installation. Please ensure there are no cables or water pipes on the wall.
[Applicable and Adjustable] The storage system has a wide range of uses. It is very suitable for hanging shovels, spades, rakes, and other gardening tools in garages, basements, or sheds. Or use it in workshops, cabinets, and other tool storage areas with rods. The installation method can be found in our video.
Product Description
Step 1
Select the installation location and mark the spot.
Step 2
Drill holes (6 mm diameter) at the marked points on the surface, then insert the pins into the holes.
Align the screw holes with the inserted pins and secure the guide rails with metal screws.
Step 3
Install the hook and plastic pin in the slot.
Step 4
You can extend the rail with connectors as needed.
Or end the rail with a locking connector.