10‑30cm Photoelectric Switch NPN NO Proximity Sensor DC6‑36V E3F‑DS30C4

1、Photoelectric Switch uses the blocking or reflection of the detected object to the beam, to detect the existence of the object.

2、Photoelectric Switch converts the input current into a light signal on the transmitter, and the receiver detects the target object according to the strength or presence of the received light.

3、Objects are not limited to metal, and all objects that reflect light (or block light) can be detected.

4、The switch stays open, and closes when it detects the object in detection range.

5、High precision, quick response, strong anti‑interference capability.

Features:

Photoelectric Switch uses the blocking or reflection of the detected object to the beam, to detect the existence of the object.

Photoelectric Switch converts the input current into a light signal on the transmitter, and the receiver detects the target object according to the strength or presence of the received light.

Objects are not limited to metal, and all objects that reflect light (or block light) can be detected.

The switch stays open, and closes when it detects the object in detection range.

High precision, quick response, strong anti-interference capability.

Specification:

Model: E3F-DS30C4

Detection Range: 10-30cm, ±10%

Detection Range Adjustment: sensitivity regulator

Detection Target: transparent/opaque object

Response Time: 1ms

On-delay: 1.5ms

Light Source: infrared light 660nm

Supply Voltage: DC12-24V(6-36V) impulse (P-P) <10%

Withstand Voltage: AC1000V 50/60Hz 1min, between charging part and housing

Voltage Influence: ±10% detection distance (within ±15% of rated supply voltage range)

Current Consumption: N.P type: <20mA, A type: <1.7mA

Control Output: N.P type: <300mA, A type: <400mA, J type: <2A Contact Life: 100,000 times

Circuit Protection: N.P.D type: reverse connection protection, surge absorption, load short circuit protection; A type: surge absorption

Operation Environment: -30~65°C (no freezing, no condensation), 35-95% RH

Temperature Influence: temperature range -30~65°C, at +23°C: ±15% detection distance; temperature range: -25~60 ° C, at +23 ° C: ± 10% detection distance

Insulation Impedance: >50MΩ (DC500 megohmmeter), between charging part and housing

Housing Material: ABS

Detection Surface (lens): PMMA

Weight: 65g (approx.)

Package List:

1 x Photoelectric Switch