MMICHEL
Published on 06/01/2025, FranceEasy to install, 1 phase input and output, module adaptable to any system.
2 people found this helpful1/5
160° Recessed Motion Detector Wall Switch for LED and Halogen Bulbs (1)
Of which environmental contribution £0.10 including VAT.
Sold by Permu UK
You may also like
Compare with similar items
Product information
Description
General Description
This PIR motion detector is designed to replace a conventional on/off switch. It is ideal for installations using LED bulbs, starting from 1 W. This product is particularly suitable for indoor and outdoor use, although it is not suitable for speed control.Technical Specifications
- Power: 1 to 500 W for ohmic loads (incandescent bulbs)
- Power: 1 to 200 W for inductive loads (LED lamps, fluorescent tubes)
- Adjustable twilight switching threshold
- Switching time: 10 seconds to 7 minutes
- Detection angle: 160°
- Maximum range: 9 m
- Recessed dimensions: 49 x 49 x 30 mm
- Protection: IP20
- Standby power consumption: 0.1 W
- Power consumption in operation: 0.45 W
- Voltage: 230 V ~ / 50 Hz
- Decorative panel: 80 x 80 mm
- Installation height: 100-180 cm
Compatibility and accessories
- Suitable for 60 mm and 68 mm diameter recessed boxes
Installation
To install this detector, ensure you adhere to the recommended installation height of 100 to 180 cm. Follow the mounting instructions for correct installation in a compatible box.Use
This detector enables automatic lighting operation based on motion detection. Adjust the switching threshold according to your needs for optimal activation.Features
- BrandXVX
- ColourWhite
- Number of modules1
- With indicator lightNo
- Complete / ComposableWaste kit
- SmartNo
- WaterproofNo
- IP ratingIP20
- MaterialPlastic
- Switch mechanismSwitch
- Type of electrical installationBuilt-in
- Number of terminals1
- PackNo
- Weight500 g
- Power1 W
- Voltage230 V
- Contact typeNormally closed
- ControlManual control
- ManoMano ReferenceME83774491
- MMID681070990674
- Product codeGGB-3967
- EAN8130966046445
Customer reviews
4,2
/ 15 Reviews
PPAUL
Published on 27/03/2024, Franceeasy to install for connection, look carefully at the drawing on the back of the article
1 person found this helpfulRRaphaël
Published on 23/11/2023, FranceVery easy to install to replace an existing switch
JJean
Published on 18/11/2024, FrancePro Customer
The product works properly. Pay attention to the dimensions of the housing because it was very tight in my case.
MMichel
Published on 05/05/2025, FranceThis is a project that has not yet been implemented, so there is no opinion on how it will work yet.
Ffranck
Published on 28/12/2023, Francethis product worked 6 times
You are here:
'/%3E%3C/svg%3E){kind=small}