10m 250V 16A float switch for submersible pump

This hollow float is lifted by the rising liquid and pushed upwards until a starting process is triggered when it reaches a 50° angle from the horizontal. The float can be secured by screwing it onto the side or, if the tank is open, by placing it above the liquid. The standard ballast weight allows for very precise setting of the switching point. Suitable for almost all pumps.

The float is ideal for checking the level of any liquid that does not attack its material, regardless of the degree of contamination. You can use this float as a full or empty indicator, to control pumps or valves, or for other alarm signals.

If your pump has an output power greater than 1.1 kW, you must connect a commercially available standard plug or a power relay.

Application / Information / Properties If your pump has an output power greater than 1.1 kW, you must connect a standard power contactor or a corresponding power relay. 380/400V three-phase pumps can also be controlled with a 380V power contactor.

Properties Max. switching angle +/- 50°, permissible current fluctuations +/- 10%, max. 16A Protection class IP 68 Input voltage 230 VAC ~ 50 Hz Ignition angle +/- 50° Temperature range 0 to 50 °C Additional features/Specifications Cross-section 3 x 0.5 mm² Product float switch Plug without plug Filter medium Fresh/Clear/Well/Wastewater Weight [kg] 1.4000 Packaging: Height in mm 160 Packaging: Length in mm 240 Packaging: Width in mm 100