10m 250V 16A Float switch for submersible pump

The WilTec float is a hollow float that operates on the principle of upward force. This hollow float is lifted and pushed upwards by the rising liquid until, at a 50° angle to the horizontal, the pump is activated. The float can be attached by screwing it to the side or, if the tank is open, by placing it on top of the liquid. The switching point can be precisely set thanks to the ballast weight included as standard. Suitable for almost all pumps. The float is ideal for controlling the fill level of any non-corrosive liquid, regardless of the degree of fouling. You can use this float as a full or empty indicator, to control pumps, valves, or other alarm signals. If your pump has a power rating of more than 1.1 kW, you will need to install a standard, commercially available power connector or relay upstream. A 380/400V three-phase pump can be operated with a 380V power connector.

10m 250V 16A Float switch for submersible pump

Reference 50593

Registration number WEEE DE45283704

Number of packages: 1

Dimensions: 80 x 159 x 43 mm

Material: PVC

Application / Information / Characteristics: If your pump has a power output of more than 1.1 kW, you should use a standard power protection device or a suitable power relay.

Features Max. switching angle. +/- 50°, Current fluctuations allowed +/- 10%, Max. power. 16A

Protection class IP 68

Input voltage 230VAC ~50Hz

Activation (float) Angle +/- 50°

Temperature range 0-50°C

Extras/Features Cross-section 3 x 0.5mm²

Product Float Switch

Plug Without Connector

Filter medium Fresh/Clear/Well/Wastewater

Weight [kg] 1.4000

Package: Height in mm 160

Package: Length in mm 240

Package: Width in mm 100

Availability Delivery time up to 7 days*

Navigation Package

Note: All data is measured manually, please allow a 1-3cm error; due to differences in light and display, there may be some color difference, please refer to the actual item received.