11MM Wire Rope Grips x10 - DIN741 Galvanised Commercial Bulldog Clamp

Specifications: Product Code: SFCOMG11 Product Weight: 0.62KG x10 11MM Galvanised Commercial Wire Rope Grip DIN741 Suits 11MM Wire Rope Finish - Galvanised Quantity - 10 PRODUCT CODE A (MM) B (MM) C (MM) D (MM) E (MM) F (MM) G (MM) SFCOMG03 12.6 5.2 10 3.4 20.2 9.1 18.6 SFCOMG05 13 6.2 11 4.6 23.8 9.2 22 SFCOMG06 16 7.6 12 5 28 10 24 SFCOMG08 20 10 14 6 35 14 28.5 SFCOMG10 24 11.5 18 8 45 17 34 SFCOMG11 23 11.5 19 8 44 18 36 SFCOMG12 21.5 13 22 10 56 21 41 SFCOMG14 31 12 22 10 55 21 41 SFCOMG16 32 16 25 12 64 26 50 SFCOMG20 41 20 27 12 75 26.5 54 SFCOMG22 44 24 32 14 86 35 61 SFCOMG25 42 27 36 13 87 36 65 SFCOMG30 56 31 35 16 111 41 74 SFCOMG32 58 36 41 16 121 48 78 SFCOMG38 70 41 45 16 143 54 89 SFCOMG50 65 51 51 17 154 62 105 Our Wire Rope Grips, manufactured from mild steel with a galvanised coating for corrosion resistance, are suitable for use on board boats in a rigging setup, or similar applications on land. The main use of these grips is to create loops of wire in a rope assembly, or when a temporary join is needed. The galvanised finish gives excellent corrosion resistance. Notes on assembly and use. 1 - Prior to fitting, the threads on the nuts and bolts should be well greased. 2 - Spacing between the grips should be at least 6 times the diameter of the rope. 3 - Ensure the grip is always orientated correctly, the 'u' bolt should placed on the unloaded end of the rope. 4 - Tighten each nut evenly and in turn to achieve the recommended torque settings. 5 - Leave unused for 24 hours and check torque setting again, re-tighten if necessary. 6 - After first application of the load, re-check torque setting, re-tighten if necessary. 7 - During service periodically check the torque setting.