1/2in Float Ball Valve, Automatic Water Level Control Tank, Stainless Steel Floating Ball Valve

【Automatic Control】 The float valve controls the flow rate and the opening and closing of the inlet pipe by the floating of the ball. When the water level rises to a certain level, the water injection will be stopped; When the water level drops to a certain limit, water is automatically injected.

【G1/2in】 G1/2" external thread inlet, suitable for most types of water pipes, easy to install and adjust, and has an attractive appearance, with a small size, practical design, and simple installation.

【Three-Hole Valve】 This float valve replaces the traditional float ball and can be used in high water tanks, swimming pools, industrial water towers, and other systems.

【Stainless Steel Valve】 The float valve controls the flow and the opening and closing of the inlet pipe through the float ball's movement, with automatic control, low-level self-replenishment, and automatic water shut-off functions.

【Specifications】 Thread size: G1/2in - Maximum installation tilt: 30 degrees - Working pressure range: ≤1.0MPa - Residential tap water pressure: 0.3-0.5MPa - When using siphon pipes for water supply, ensure that the water level drop is greater than 80 cm/31.5 inches; otherwise, it will affect the water outlet.

Stainless steel body

The stainless steel material provides a delicate and beautiful appearance while being more robust and durable.

Large displacement

The floating ball valve is small and space-saving, and can effectively increase the water flow rate, which is more than a traditional floating ball valve.

Friction and shock resistance

The rigid shell effectively increases the service life of the float valve.

Solid floating core

The floating core design increases control of the Water level sensor for the regulating valve, making water refilling more sensitive.

Instructions for Use

1. Applicable water pressure range: 1.2 to 10 kg (please use under reasonable circumstances).

2. The product must be installed vertically on a horizontal surface, and the float valve must be facing downwards during installation.

3. First, secure the water pipe to the horizontal surface, then install the product onto the water supply pipe.

4. During use, the shut-off valve of this product must be fully open.

5. If two float valves are installed in a pool, they must be kept at the same level.

6. Please clean any impurities from the pipe during installation to prevent them from blocking the ball valve.

7. When the product is installed indoors, there will be water droplets at the bottom of the ball valve; this is normal.