12V 24V 20A MPPT Solar Charge Controller for Photovoltaic Power Generation Panels

Features:1.Data Display: The on-screen display is rich in content.All different real-time data is displayed on one screen for easy user inspection.
2.Low Power Consumption: The power supply adopts ultra-low power consumption chips to reduce power consumption in static standby mode and overall power consumption.
3.Dual-Period Control Mode: 5V USB output for charging mobile phones and fans, dual-period control mode, excellent heat dissipation performance.
4.MPPT Technology: The solar controller adopts MPPT technology.The MPPT controller can draw the maximum power from the battery board, thus providing a higher charging current.
5.Application: This solar controller automatically detects 12V and 24V system voltage, widely used for RV, utility vehicle, boat, yacht.

Specifications:

Item Type: Solar Charge Controller
Material: Aluminum, ABS
Gross Weight: 326g / 11.5oz
Product Size: 14.3x8.7x4.5cm / 5.6x3.4x1.8inch
Voltage: 12v 24V
M20A Style: -160W (12V) 520W (24V)
-30℃ -70℃
Application: solar controller

How to use:

1. Install the controller fixed on the vertical plane on the hole diameter and orifice, spacing, in order to ensure the good heat dissipation conditions of the controller, a space of 10cm is reserved at the bottom of the controller. 2. As shown in the correct wiring sequence: load, battery, and solar panel. The panel is connected to the controller to ensure correct polarity for the load, battery, solar panel, and controller.
Package List:1 x Solar Controller
5 x Extension Tubes
5 x Short Screws
5 x Long Screws
5 x Nuts
1 x Instruction Manual
1 x CC