12V 24V 36V 48V PWM Solar Charge Controller with Electric Activation Panel Regulator, LCD Display, 120A Lithium Battery

Features:1. Stable Performance: Uses original imported chip control, high efficiency, excellent quality, low internal resistance, large MOS tube driver.
2. Multiple Functions: Battery discharge, voltage, low voltage protection, charge discharge current overload protection, photovoltaic panel current overload protection, machine temperature overheat protection.
3. Safe Protection: The solar charger controller has a solar panel and battery protection connector, and a 5V 2A USB port with short-circuit protection.
4. LCD Screen with Backlight Function: All different real-time data is displayed on the LCD screen, making it very convenient for users to check the data.
5. Material and Applications: The solar charge controller is made of high-quality PC and aluminum alloy, with a lithium charging process.
Specifications:Item Type: Solar Charge Controller
Material: Aluminum Alloy, PC
Weight: Approx.1185 g / 41.8 oz
Size: Approx. 230x165x66mm/9.1x6.5x2.6in
System Voltage: 12V 24V 36V 48V
PV Input Voltage Range:
15V to 23V (12V) / 30V to 46V (24V) / 45V to 69V (36V) / 60V to 92V (48V)
Charging Mode: PWM
Product Introduction
1. Uses an industrial heat dissipation structure design, a flame-retardant material casing, and four-button operation.
2. Uses a large MOS tube driver package with high efficiency, excellent quality, and low internal resistance, resulting in stable performance.
3. Battery protection against over-discharge, overvoltage, and undervoltage.
4.The charge discharge current is protected against overload.
5.Protection against photovoltaic panel current overload.
6.Overheating protection is provided.
7.Reverse connection protection for the positive and negative electrodes is provided.
8.Short-circuit protection is provided for the load output.
9.Used in colloidal water batteries, lithium iron phosphate batteries, and lithium-ion batteries.
10.Charge and discharge control parameters can be adjusted manually.
11. Uses original imported chip control.
12.Equipped with two independent USB interface circuits (total constant current 5V 2A, short-circuit protection).
13.LCD screen with backlight function.
14.Automatic identification of 12V 24V 36V 48V battery in all stages.
15. Automatic "default" and manual adjustment of the lithium battery in all stages.
16, when the battery voltage is "0", the photovoltaic panel can be started.
17. The load is normally on (the load is permanently on).
18. Pure light control mode (charge during the day, the day is dark and bright).
19. Time controlled mode (manually set the on time and off time).
20. Light control and time delay (when light control is activated, you can adjust how long the light stays on).
21. Activate the random loading function.
22. Clock function (power off invalid).
23. Accumulated charge and discharge amount.
24.Has the function of restoring factory settings.

Package List:

1 x Solar Charge Controller
1 x English Specification

Note:

1. Prepare relevant tools and select high-end cables with a current density of 26A/mm2.2. The controller will generate heat when operating. Please install it in a well-ventilated environment.3. Connect all battery cables before connecting other cables.4. Unable to connect to the rated charging current controller of the photovoltaic panel.5. Do not connect the load to the rated discharge current of the supercontroller.6. Do not use any switching power supply (such as AC to DC power supply and DC to DC power supply) to connect to the controller instead of the photovoltaic panel.7. The line disassembly sequence is opposite to the wiring sequence.8.The output of the photovoltaic panel must be 1.5 times greater than the battery voltage.