1/5
12V/24V 70A PWM and MPPT Solar Charge Controller, Short Version, Battery Regulator, Dual USB Port, LCD Screen
Sold by Qiudie-homelavafans
Product information
Description
Features:1.Automatic voltage identification system, automatic 12/24V recognition
2.User-friendly LCD display and dual-button operation of the human-machine interface
3.Reliable overvoltage protection, short-circuit protection, overload protection, over-discharge protection
4.Precise temperature compensation, automatically correcting the charging and discharging voltage, improving battery life
5. The solar panels, battery, and positive terminals of the solar charge controller are all connected together, using a negative MOSFET in the circuit.
Specifications:Features:
Automatic voltage identification system, automatic 12/24V recognition.
User-friendly LCD display and dual-button operation of the human-machine interface.
Completed technical data for configuration and modification.
The load control mode can be selected, and the timer function can be reset for street lighting at night.
Discharge capacity control.
Working memory function: records the total system operating time, records error timers during operation, and records fully charged battery times.
Reliable overvoltage protection, short-circuit protection, overload protection, over-discharge protection, and over-temperature protection.
Precise temperature compensation, automatically correcting the charging and discharging voltage, improving battery life.
Reverse connection protection.The controller's function is to protect against overvoltage and overload.When the battery voltage is too low, the controller stops the output; once the solar panel is charged, the cell recovers to 12.6 V.
3.12.6 V is the recovery discharge voltage.
4. The controller's normal voltage range is 10.7V to 13.7V.Both of these voltage fluctuations can be adjusted manually.
If you experience any problems, try setting the floating voltage to 13.7V:
First, press the MCU control button for approximately 3 to 4 seconds. A management interface will then appear on the screen.
Second, press the add button on the screen until the voltage reaches 13.7V.
Finally, press the MCU control button again. The controller saves the data when the screen is not flashing.
5.Use a 12V battery with a 17V solar panel, or a 24V battery with a 34V solar panel.
Package List:1 * Solar Charge Controller
1 * User Manual
2.User-friendly LCD display and dual-button operation of the human-machine interface
3.Reliable overvoltage protection, short-circuit protection, overload protection, over-discharge protection
4.Precise temperature compensation, automatically correcting the charging and discharging voltage, improving battery life
5. The solar panels, battery, and positive terminals of the solar charge controller are all connected together, using a negative MOSFET in the circuit.
Specifications:Features:
Automatic voltage identification system, automatic 12/24V recognition.
User-friendly LCD display and dual-button operation of the human-machine interface.
Completed technical data for configuration and modification.
The load control mode can be selected, and the timer function can be reset for street lighting at night.
Discharge capacity control.
Working memory function: records the total system operating time, records error timers during operation, and records fully charged battery times.
Reliable overvoltage protection, short-circuit protection, overload protection, over-discharge protection, and over-temperature protection.
Precise temperature compensation, automatically correcting the charging and discharging voltage, improving battery life.
Reverse connection protection.The controller's function is to protect against overvoltage and overload.When the battery voltage is too low, the controller stops the output; once the solar panel is charged, the cell recovers to 12.6 V.
3.12.6 V is the recovery discharge voltage.
4. The controller's normal voltage range is 10.7V to 13.7V.Both of these voltage fluctuations can be adjusted manually.
If you experience any problems, try setting the floating voltage to 13.7V:
First, press the MCU control button for approximately 3 to 4 seconds. A management interface will then appear on the screen.
Second, press the add button on the screen until the voltage reaches 13.7V.
Finally, press the MCU control button again. The controller saves the data when the screen is not flashing.
5.Use a 12V battery with a 17V solar panel, or a 24V battery with a 34V solar panel.
Package List:1 * Solar Charge Controller
1 * User Manual
Features
- BrandOTHERS
- Power20 W
- ManoMano ReferenceME242395181
- MMID637297980053
- Product codeQD-GB26Y30129
- EAN5005049701197
Advice from
Wind turbine buying guide
Interest in domestic wind turbines in the UK increases year after year. Ideal for a countryside home, but trickier to set up in a city, wind turbines can be a great way to get into renewable energy and off-grid energy production. Read on to find out more about installing a wind turbine for more sustainable living.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}