Skip to main content
1/5

12V 3.6A Battery 5-Stage Car and Motorcycle Battery Charger NPTERBL

£45.58
Sold by Tinor-GB

Product information

Description

General description

This 12V 3.6A Battery Charger is designed for both car and motorcycle batteries, featuring a microprocessor control for enhanced performance. It offers a fully automatic 5-stage charging process that protects your battery from overcharging, allowing you to leave it connected indefinitely. This charger is suitable for various battery types, including calcium, gel, AGM, and wet batteries, and can help restore drained and sulfated batteries.

Technical specifications

  • Input Voltage: 100-240V AC, 50-60Hz
  • Rated Output: 12V DC, 0.8A/3.6A
  • Minimum Start Voltage: 8.0V
  • Charging stages: 5 (Desulfation, Bulk, Absorption, Float, Stop)
  • Thermal protection: 65°C +/- 5°C
  • Efficiency: approximately 85%
  • Dimensions (L × W × H): 170 × 65 × 40 mm
  • Weight: 450g
  • Installation

  • AC cable length: 1.5m
  • DC cable length: 1.4m
  • Usage

  • Desulfation: Breaks down sulfation in batteries left flat for long periods.
  • Bulk: Charges the battery at maximum rate until approximately 60% charge.
  • Absorption: Slows charging to allow the battery to reach 80% charge.
  • Float: Maintains the battery at 100% without overcharging.
  • Stop: The charger ceases charging and cuts off output.
  • Other information

  • Switch Mode Technology: Yes
  • Polarity Protection: Yes
  • Output Short Protection: Yes
  • Non-Battery Link Protection: Yes
  • Over Voltage Protection: Yes
  • Over Temperature Protection: Yes
  • Cooling: Natural Convection
  • Reverse connection protection: Yes
  • Output short circuit protection: Yes
  • Beautiful box for packaging.
  • Features

    • Brand
      TINOR
    • Voltage
      12 V
    • Certification body
      CE
    • Starting function (boost)
      Yes
    • Height
      4 cm
    Advice from

    Jump lead buying guide

    Jump leads are an invaluable piece of kit in the event of a flat car battery. Select them according to your engine type, the quality of their clips, the amperage of your battery and the length of the cables. You will also have to choose a cable cross section; the most common options are 25 mm², 35 mm² or 50 mm².
    Jump lead buying guide
    You are here:
    The DIY, home and garden specialist

    The DIY, home and garden specialist

    Reliable delivery

    Reliable delivery

    Flexible payment options

    Flexible payment options

    More than 7 million individual and professional customers

    More than 7 million individual and professional customers