Car battery charger fully automatic 6V 12V car motorcycle charger LCD screen trickle charge

Intelligent battery charger 6V/12V-4A!

This fully automatic MZBC04 monzana® 7-step car battery charger is used for charging and trickle charging 6V or 12V lead-acid batteries with liquid electrolyte (WET), maintenance-free lead-acid batteries (MF), gel electrolyte (GEL) or Electrolyte Absorbent Mats (AGM). With the blue backlit LCD display, you can monitor the charge level at all times and the display will indicate the end of the charge by changing to green. This is easy to understand and easy to use.

In addition to the 7 charging steps of fully automatic battery charging, there are six charging programs to choose from. The car battery charger is also able to charge deeply discharged vehicle batteries. The minimum battery voltage for this is 0.7 V. After the desired charging voltage has been selected, the microprocessor-controlled charger does everything fully automatically. The programs are easily set by the operation mode button.

The modern safety technology with reverse polarity protection, overheating protection, overload protection, spark protection and short-circuit protection protects you and the device from incorrect operation. In the event of errors in operation, this is shown on the LCD display.

If your vehicle stands longer in winter, you can permanently connect the battery to the battery charger thanks to the trickle charge. This keeps your battery constantly charged. You can also use the 4 eyelets to mount the charger on the wall.

If there is a power failure in the 230V supply during the storage process, the device saves the previously selected charging program thanks to the memory function and continues to charge automatically in the last selected program after mains power is restored.

The battery charger has protection class IP 65 and is therefore dust-tight and protected against water jets from any angle. This allows you to charge the car battery even when it rains.

With 12-volt batteries, the battery tester works without a mains connection. Simply connect the binding posts and the LCD display shows the battery voltage. A mains connection is required for 6-volt batteries.

Program variety:

• Program 1:
  6V motorcycle mode (7.2V/1A) For 6V batteries (1.2Ah-14Ah in normal state). For WET, MF and most GEL batteries.
• Program 2:
  6V motorcycle mode winter (7.4V/1A) For 6V batteries (1.2Ah-14Ah in normal state), in cold conditions (from 10 °C and colder). This charging program is also designed for many AGM batteries.
• Program 3:
  12V motorcycle mode (14.4V/1A) For 12V batteries (1.2Ah-14Ah in normal condition). For WET, MF and most GEL batteries.
• Program 4:
  12V motorcycle mode winter (14.7V/1A) For 12V batteries (1.2Ah-14Ah in normal state), in cold conditions (from 10 °C and colder). This charging program is also designed for many AGM batteries.
• Program 5:
  12V Auto Mode (14.4V/4A) For 12V batteries (14Ah-120Ah in normal condition). For WET, MF and most GEL batteries.
• Program 6:
  12V auto mode winter (14.7V/4A) For 12V batteries with a capacity between 14 Ah and 120 Ah when cold (from 10 °C and colder). This charging program is also designed for many AGM batteries.

Product advantages:

• suitable for WET, MF, GEL and AGM batteries
• Reverse polarity protection, overheat protection, overload protection, spark protection and short circuit protection, IP65
• Memory function: remembers the current charging status even in the event of a power failure
• Battery test function without mains connection
• Trickle charge: does not overcharge the battery even if left connected
• The charging voltage adapts to the outside temperature
• 6 programs
• 7 loading steps
• Fully automatic charging for motorcycles, cars etc.
• Blue illuminated LCD display shows charging process and end of charging (green)
• easy handling
• 4 eyelets for wall mounting
• low input power consumption in standby mode (less than 1.5 W)
• impact-resistant ABS plastic housing

Technical specifications:

• Power: max: 4A
• Output: 6V/12VDC 4A/2A
• Battery capacities: 6-140 Ah
• Protection class: IP65
• Cable length charging cable: 1.4m
• Cable length mains cable with plug: 1.7m
• Dimensions: 25.5x13.5x5.6cm

Scope of delivery:

1x battery charger with charging cable, power cable, terminal clamps

7 steps for a long battery life:

• Analysis:
  After the correct connection, the LCD display provides an initial indication of the state of charge and the condition of the battery.
• Preload:
  When the battery voltage is 1.5V to 12V, the charger will charge the battery a little to prepare it for better battery maintenance.
• Soft start:
  Charging process with a small charging current.
• Constant Current Charge:
  Fast battery charging. Automatically adjusts charging current based on battery status to ensure long battery life.
• Constant Voltage Charge:
  The charging voltage remains at 14.6V, but the charging current gradually decreases until the battery is fully charged.
• resting phase:
  After the battery is fully charged, charging stops.
• trickle charge:
  Automatic on-off switching. The charger monitors a fully charged battery. If the battery falls below 12.8V, the charger will restart at level 1 for recharging without overcharging the battery.