12V 840L/H Submersible Pump with Micromotor Water Pump for Campervans, Ponds, Aquariums, Showers, and Gardens

DC submersible car wash pump (pressure cannot be compared to a high-pressure car wash gun, please note).

Rated

voltage: 12V, operating voltage 6-15V, up to 18V.

Rated current: 1.2A, matching supply current should not be less than 1.5A.

Maximum head: approximately 5 meters (the higher the voltage, the larger the head).

Maximum flow rate: 600 L/h (horizontal flow). The wire is divided into two parts: black wire: three-core, bare head, 1.5 meters long, wire diameter 5.7 mm (very thick); white wire: 1.5 meters long with a 5.5*2.1 mm female connector.

Size: 98 (H) * 38 mm, outlet outer

diameter: 12 mm, inner

diameter: 9.7 mm. JT-500 DC submersible pump, mainly used for car washes, aquarium water changes, washing machines, garden/garden watering, stream pumps, showers, soilless growing, etc.

1. Can be connected to a car power supply; a 12V battery can operate it, making it easy to move.

2. This water pump is submersible, not a self-priming or land-based pump. The water temperature should not exceed 40 degrees Celsius.

3. Low noise, less than 35dB at 10cm.

4. Pay attention to the positive and negative terminals when connecting to the power supply, otherwise it will affect the pump's flow rate. The brown wire connects to the positive terminal, the blue wire to the negative terminal, and the yellow and green wires are the ground wires and do not need to be connected.