12V DC screw pump - Stainless steel for deep wells/tanks, 30m head, 1.2m³/h flow rate

Features:

1. REPOSITION AND HEAD: This 12V deep well pump is a single eccentric screw pump with an elastic stator covering the screw. The working principle of the screw pump allows its maximum flow rate up to 1.2 m³ / h and the maximum head up to 30 meters
2. Power supply mode: only one battery or 12V battery, or 300W solar panel is needed to drive this deep well pump. When solar panels are directly connected to the pump, it is recommended to add an MPPT controller (not included) for better performance
3. OUTLET AND JOINTS: Package contains 1 inch outside diameter hook joint. Therefore, customers can choose to connect the deep well pump using 3/4 inch NPT threaded tubing or 1
4 inner diameter pipe.Precise mechanical seal: The solar submersible well pump features a stainless steel body throughout.The motor wire is made of copper, and the cable is made of high-quality rubber material with good insulation performance.The stainless steel spring and precision bearings offer high strength, good sealing, low resistance, durability, safety, environmental protection, comfort, reliable operation, and a long service life.
5.Penetration holes and power cords: The deep well pump is equipped with two rope penetration holes, making it easy for users to insert or remove the pump from the well.The submersible screw pump is equipped with a 7-meter long copper conductor power cord, which is convenient for use in deeper wells.
Specifications:Item Type: Direct Current Screw Pump
Model: 3SYDC12V / S1.2-30
Material: Stainless steel, cast iron, copper, rubber
Flow Rate: 1.2 m³/h
Head: Approx.30m / 98.4ft
Outlet: NPT 3/4in
Outlet Fitting: NPT 1in
Power Cord Length: Approx. 7m / 23ft

How to Use:Follow the instructions in the manual to learn how to use the product.
Package List: 1 x Pump
1 x Water Outlet Seal
1 x User Manual
Note:Please ensure the pump is completely submerged in water before use to prevent damage from dry running.