12V Electric Winch Wireless Remote Control Transmitter Receiver Kit for Truck ATV SUV

1.The wireless remote control allows you to operate the winch within a 50-foot range without the need for cables or switches.
2.Easy to use, you can start, stop, raise, or lower the winch simply by pressing the remote control transmitter button.
3.Suitable for most self-retrieving winches, such as Warn, Ramsey, Superwinch, Smittybilt, Gorilla, Bulldog, etc.
4.Designed with an indicator light, which clearly and intuitively displays the remote operation, making it convenient to use.
5.Manufactured according to original production specifications, in compliance with strict quality standards, long service life.
Specification:Item Type: Winch Remote Control Kit.
Material: ABS + Metal
Battery Type: Alkaline Battery (Included)
Battery Capacity: 150mAh
Battery Model: 12V 23A
Frequency: 434MHz
Voltage: 12V
Remote Control Size: Approx.43 x 100 mm / 1.7 x 3.9 inches
Receiver Size: Approx.43 x 70 mm / 1.7 x 2.8 inches
Features:
Remote range is up to 50 feet.
The transmitter is equipped with a long battery life.
Battery and energy-saving circuitry.
Transmitter and receiver.
Visual indicator shows remote operation.
An additional transmitter can be used to operate the receiver.
Installs in minutes.
A replacement transmitter battery is readily available.
Suitable for trucks, ATVs, and SUVs.
The wireless remote control is designed for front self-recovery winches only.
The remote control is not designed for or used in industrial applications (carrier/utility vehicle transporter, tow truck, crane, etc.) or any other winch or crane remote control application.
We recommend using the winch as follows:
1. Loosen the winch clutch.
2.Pull the winch cable approximately 1.5 meters.
3. Re-engage the winch clutch.
4. Insert the remote control receiver plug into the female connector on the winch electromagnetic control box. If your wireless remote control is type -03, you must correctly connect the black ground wire to the negative pole of the battery.
5. Place your receiver somewhere.
6. Keep the receiver antenna straight.
7. Pull the antenna out of the transmitter and lower the transmitter cover to expose the control buttons.
8. Press the button, you can operate the winch to start, stop, enter and exit.
(It is strongly recommended to find a professional for installation)

How to use:

Wiring:1. Red wire: Positive (+)2. White wire: OUT3. Yellow wire: IN4. Black wire: negative ()5.Blue wire: Antenna
Package list:1 remote control1 receiver1 manual