12V to 24V DC Converter, 12V to 24V 15A DC Converter with Fuse, Waterproof Quick Connector, DC Boost Converter for Golf Cart, LED Lighting, Automotive

• 【Boost Converter】This 12V to 24V DC boost converter can convert DC 12V to DC 24V. Low energy consumption. Input voltage: DC 9-20V, Output: DC 24V Maximum current: 15A. WARNING: 1. Please test the output voltage before use; 2. Please check the positive and negative polarity of the power supply before wiring. 3. You must connect the negative wire to GND before use, or the output voltage will not be changed!
• 【Safer】To ensure the safety of electrical appliances, our 12-24 volt converter is equipped with a fuse. If the voltage is too high and the circuit is interrupted or abnormal, the fuse blows and the transformer stops working, thereby protecting the device. Additionally, it reduces the risk of fire or explosion.The conversion rate is 96% or more and the output is correct.
• 【Easy Installation】The 12V 24V voltage converter is equipped with quick-connect cable glands. There is no need to glue the wires, saving a lot of effort. Note: Strip the 0.4 wires (about 10mm) and insert them into the connector.
• 【IP67 Waterproof】 This 12V to 24V converter is filled and sealed with organic silicone technology for heat transfer, waterproof, shockproof, moisture-proof and dustproof.
• 【Wide application】 The 12V buck converter can be used in a wide range of applications. It can be used in golf carts, club cars, LED light bars, buses, minibuses, large trucks, electric motors, GPS navigation systems, solar energy systems and electric bicycles.The wide range of compatible applications highlights the versatility and flexibility of the converter.

This is a highly reliable DC-DC converter with wide input voltage, low power consumption, high efficiency and high reliability. We offer a wide range of voltage converters for different applications.

Fuses and fuses
Transformers are equipped with fuses which blow if the voltage is too high. This reduces the risk of fire or explosion and fully protects the user.

Quick plug cable connectors for easy installation
The voltage converter is equipped with a quick plug cable connector for quick connection. There is no need to glue the cables, which saves a lot of problems. Note: Strip the wires by 0.4 (approximately 10 mm) and insert them into the connector.

Highly efficient heat dissipation
Adopting non-isolated synchronous step-down technology, the self-mounting transformer operates without heat and is safer.

Safety Notes:
The load connected to the converter output must not exceed the specified maximum load power. Excessive rated loads can damage the power regulator.
If your equipment is loaded at near maximum power, choose a more powerful converter.
Connect the converter and your equipment according to the wiring diagram provided.