149Pcs 30m/100ft Automatic Drip Irrigation Kit Self Watering System for Greenhouse Garden

• 1. Multi-function: Our drip irrigation kit comes with two types of sprayers. Suitable for automatic plant watering, garden irrigation, automatic greenhouse watering, automatic watering, and garden irrigation. It is an efficient and economical solution for plants and crops.
• 2. Simple installation, no digging or plumbing required: Soak the end of the hose in hot water for one minute before attaching the fittings. Installation is easier, and once cooled, the hose stays tight. You can cut the hose to the desired size.
• 3. Connecting Drip Irrigation Components: Connect the 1/4-inch drip tubing to the main water supply line. The other end is directly connected to a transmitter that distributes water to the plants. The irrigation tubing distributes water directly to plants and crops, reducing water waste and ensuring plants receive the amount of water they need to grow and thrive. Shrink-wrapped packaging is convenient.
• 4. Water Saving: The drip irrigation system can save up to 75% of water. The precision watering system slowly and precisely delivers the right amount of water right where your plant needs it, at the roots.
• 5. Widely Used: The automatic watering kit is ideal for atomization, lawn irrigation, patio irrigation, roof cooling, agriculture, vegetables, greenhouses, flower beds, swimming pool misting irrigation, etc.

Garden Plant Watering Kit; Garden Watering System. This watering kit consists of a sprinkler and a condenser. Simply connect it to the tap to water your potted plants, vegetables, greenhouse plants, and flower beds in multiple ways.

Weight: 910g.
Color: Black.

Material: Rubber and plastic.

Contents:
2 capillaries (4mm, 15m) for water transport.

1 valve Three-way ball valve for hose separation.

2 pointed hose distributors with quick connectors.

1 quick connector.

1 fixing strap to prevent dripping from the tap.

30 condensers with red cap and adjustment.

20 orange nozzles with adjustable condenser.

30 positive tees for hose connection.
20 flat tees for hose connection.

30 fixed stems for hose connection.

2 capillary plugs to plug the end of the hose.

10 hose connectors.

Note:
1. The amount of water in the condenser is affected by water pressure and other factors. Low water pressure reduces efficiency. It is recommended to use multiple hoses simultaneously. Each hose connects a certain number of condenser heads, depending on the actual water pressure.

2. Before connecting the hose to the connectors, immerse the ends of the hose in hot water for one minute. This will make the connection easier and, once cooled, will stabilize the hose.

3. If possible, use a tapping screw, as the rubber hose may come loose under the high water pressure.