16-pin OBDII protocol detector junction box, professional car fault diagnostic tool

Features:1.Find errors and diagnose the OBD connector connection during decoder use.
2.Monitor the OBD interface voltage and ground and display low voltage.Displays diagnostic stitching errors.
3.Switch to the OBD interface signal.Signal lines, such as decoders for 7 to 15 vehicles online.
4.Quickly check if each pin of the OBD2 diagnostic connector is communicating normally.
5.When replacing the battery, plug the OBD2 connector into the car and connect the additional power to the control box to ensure that the vehicle data will not be lost.

Specifications:

Item Type: OBD Detector
Material: ABS
Introduction:
OBDII protocol detector and breakout box mainly used for vehicle signal judgment Car OBD line and signal transfer. Using a car fault diagnosis instrument can quickly determine the car's OBD signal reception. The signal may not match the angle and may take another signal transfer angle. The application is very convenient and solves risks down the line. This OBDII protocol detector and breakout box offers a wide range of applications in diagnostics, key programming and chip tuning.
Function:
To monitor data vapor while performing tests on the vehicle using a scan tool.This allows you to both run a test and simultaneously monitor the testing process.
Displays the test voltage on the car or truck.
Displays the communication pin number.
Is an extension of the OBD Diagnostic Link Connector (DLC).
To short-circuit pins.
To detect isolated circuit problems.
Is a power extension for small DC testers that require an external power source (maximum 1.2 amps).
To test circuits with a meter or rangefinder.
To check the power supply (pin 16), chassis ground (pin 4), and signal ground (pin 5)
Record the ECU data when replacing the vehicle battery.

Package List:Package includes: 1 x OBD adapter
1 x connection cable
1 x CD