2-channel radio remote control (RF), 3 km range, 12 V DC – transceiver for switching systems

Product Information

Features:

1. Advantages: High privacy, stable performance, and low power consumption.
2. High sensitivity: The wireless RF signal penetrates walls, floors, doors, and windows.
3. Very convenient: You can turn the receiver on and off with the transmitter (remote control) from anywhere within a reliable range.
4. The remote control range is 0 to 3000 meters – the ideal distance without signal or interference blockages. With signal and interference blockers, the range can be increased by approximately 10% to 90%.
5. Application: Control of lighting, televisions, motors, fans, cameras, video signals, audio signals, electric doors/locks/windows, etc. Specifications: Features: 100% brand new and high-quality wireless controller. Advantages: High privacy, stable performance, and low power consumption. High sensitivity: The wireless RF signal penetrates walls, floors, doors, and windows. The remote control range is 0 to 3000 meters – the ideal distance without signal interference or obstacles. With signal interference and obstacles, the range may vary by approximately 10% to 90%. Very convenient: You can turn the receiver (remote control) on and off from anywhere within range. Easy to use: Wireless control, easy installation, direct replacement for the old or defective device. Application: Control of lighting, televisions, motors, fans, cameras, video signals, audio signals, electric doors/locks/windows, etc.
Specifications:
Material: ABS
Color: Black (receiver) + Gray (transmitter)
Remote control batteries: 2 x AA batteries (not included)
Channels: 2
Remote control range: 0–3000 m (ideal range without obstacles or signal interference; range may increase or decrease by approximately 10–90% with obstacles and signal interference.)
Encoding: Fixed code, wired
Frequency: 433 MHz
Decoding: Fixed code, wired
Power supply (operating voltage): 12 V DC (3 V/6 V/9 V/24 V adjustable)
Quiescent current: ≤ 10 mA
Operating temperature: -40 °C to +80 °C °C
Receiver sensitivity: ≥-95 dB
Output current: ≤10 A
Operating modes: Tilt function, Jogging, Self-locking, Locking (adjustable)
Output mode: Contact output (AC and DC controllable)
Connection to a 12 V DC output
Receiver: 8 × 3.5 × 2 cm
Remote control: 15 × 4 × 2.5 cm
Package weight: 92 g
Modes:
1. Switch/Self-locking: Press -> On; press again -> Off
- Pressing once turns the device on. Pressing again turns the device off. (A 1-channel switch (receiver) requires a 1-button remote control (transmitter).
2. Latch: Press -> On; press another button -> Off.
- Press one button to turn on/off, press another button to turn off/off. (A 1-channel switch (receiver) requires a 2-button remote control (transmitter).
3. Momentary/Jog: Press and hold -> On; Release -> Off.
- Press and hold one button to turn on/off. Release to turn off/stop. (A 1-channel switch (receiver) requires a 1-button remote control (transmitter)).
(The default setting is Momentary; can be changed manually.)
Learning and Deleting Codes:
1. Learning: Press the learning code button. The on/off indicator will turn off; release the button. 2. Press any button on the remote control. The The indicator flashes twice and then goes out, signaling successful learning.
2. Removed: Press and hold the learn button for approximately 8 seconds. The indicator flashes, signaling successful code removal.
Instructions:
Jog Learning: Press the learn button on the control panel once. The LED flashes once and then goes out. Then press the button to be coded on the remote control. The LED on the control panel flashes several times in succession, signaling successful code entry.
Self-Locking Learning: Press the learn button on the control panel twice. The LED flashes twice and then goes out. Then press the button to be coded on the remote control. The LED on the control panel flashes several times in succession, signaling successful code entry. Learning: Press the learn button on the control panel three times. 5-Minute Delay: Press the learn button on the control panel four times. The LED flashes four times and then goes out. Then press buttons A and B on the remote control. programming remote control. The LED on the control panel flashes several times in succession, indicating successful code programming.
5-second delay: Press the learn button on the control panel 4 times. The LED flashes 4 times and then goes out. Then press the A button on the remote control to be programmed. The LED on the control panel flashes continuously several times, indicating successful programming.
10-second delay: Press the learn button on the control panel 5 times. The LED flashes 5 times and then goes out. Then press the A button on the remote control to be programmed. The LED on the control panel flashes continuously several times, indicating successful programming.
15-second delay: Press the learn button on the control panel 6 times. The LED flashes 6 times and then goes out. Then press the A button on the remote control. The LED on the control panel flashes continuously several times, indicating successful programming.
Scope of delivery:
1 * 3 km remote control transmitter (battery not included!)
1 * Remote control receiver module (incl. housing)
Note:
1. Batteries are very dangerous during transport, so you must purchase the batteries yourself.
2. Please allow 0.5-1 inch deviation due to manual measurement. (1