High Power Wireless 433MHz Remote Control Switch, RF Remote Control AC 220V/240V/110V 30A for Lights, Water Pumps, Household Appliances, and Agricultural Irrigation

Unique Design: 433MHz RF Wireless Remote Control Switch. Stable and reliable performance, receive sensitivity > 105dBm. A strong signal can penetrate walls, floors, and doors. It can control the receiver from anywhere within a reliable distance. The maximum range can reach 164 feet without obstacles.

Easy to Use: Extremely easy to set up and reset. There are 3 operating modes: momentary/toggle/latched.

You can easily configure it yourself according to your needs. The product's operating mode is adjustable. This item has already been configured in locked mode. The ON button turns it on and the OFF button turns it off. High sensitivity: The receiver uses a 30A relay, capable of handling high-power electrical devices to ensure long-term stable control. Each receiver can store approximately 20 transmitters. And one transmitter can also control several receivers; the transmitter must match the receiver.

Quality Assurance: High-quality relays that can be used more than 100,000 times. This makes the product more stable and reliable. The high-power terminals can support a current of 30A, so this product can function well even when the current is unstable. The receiver is suitable for a voltage of 85V~240V, making it more flexible to use.

Wide Application: The products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can use distance each device connected to the relay receiver via the remote control, such as lights, pumps, security alarms wireless, fans, lamps, ventilation devices, monitors, printers, fountains and other electrical equipment, etc.

Secure System: The chip code is the EV1527 learning code, which is the most popular technology that makes the remote control system more stable.

Strong Signal Reception: There is an antenna on the receiver, so you can extend it yourself to obtain a stronger signal reception. The remote control distance can be up to 50 meters.

More Flexibility: Extremely easy to configure and reset. You can easily add additional wireless switches yourself as needed.

Product Parameters

AC 85V~265V 30Amp

Voltage: AC 85V~265V

Max Current: 30A

RF Frequency: 433MHz

Supported Encoding: 1527 learning code

Receiving Sensitivity: > 97dBm

RF Operating Mode: ASK superheterodyne wireless reception

Operating Temperature: -30~+80°C

Reception Range: Open space greater than 50 meters

Standby Current: <5 mA

Locked Mode

Press the ON button, the relay will turn on; press the OFF button, the relay will turn off.

Installation

Press the learning button on the receiver 3 times. Wait 3 seconds;

Press the ON button on the remote control.

Wait 3 seconds.

Press the OFF button on the remote control. Success.