2-channel remote control for gates (433.92 MHz) – 2-pack, compatible with NOVOTRON 502, MAX43-2, MINI-522 and 522 Design – remote control for gates/garages

This garage door remote is a replacement remote and not an original accessory. We recommend checking the compatibility list for your device before purchasing.
Compatibility – Our remote is exclusively compatible with MINI-NOVOTRON 522 Design, MINI-NOVOTRON 524 Design, MINI-NOVOTRON 522, NOVOTRON 502 MAX43-2, NOVOTRON 504 MAX43-4, NOVOTRON 512 MIX 43-2, MNHS433-02, and MCHS43-2.
Easy operation thanks to the included instructions. Lightweight and easy to carry, it can also be attached to your bag as a decoration. Telecom Portal – Remote control frequency 433.92 MHz, 2 channels. Customer Service: All our garage door remotes undergo a quality check before shipping. If you have any questions about our remotes, please contact us. We offer a replacement or refund. This garage door remote is a replacement remote and not an original accessory. We recommend checking the compatibility list for your device before purchasing. Compatibility – Our remote is exclusively compatible with MINI-NOVOTRON 522 Design, MINI-NOVOTRON 524 Design, MINI-NOVOTRON 522, NOVOTRON 502 MAX43-2, NOVOTRON 504 MAX43-4, NOVOTRON 512 MIX 43-2, MNHS433-02, and MCHS43-2. Easy operation with instructions – Instructions are included. Lightweight and easy to transport, it can also be decoratively attached to your bag. Remote control connection – remote control frequency 433.92 MHz, 2 channels. Customer service – All garage door remote controls undergo a quality check before shipping. If you have any questions about our remote controls, please contact us. We offer a replacement or refund.

Technical Specifications:

- Type: Programming via receiver

- Frequency: 433.92 MHz

- Code: Rolling Code

- Battery: Built-in battery

- Buttons: 2

Compatible Models

MCHS43-2

MTR43-2

MNHS433-02

MNHS433-04

NOVOTRON 502 MAX43-2

NOVOTRON 504 MAX43-4

NOVOTRON 512 MIX 43-2

MINI-NOVOTRON 522

MINI-NOVOTRON 524

MINI-NOVOTRON 522 Design

MINI-NOVOTRON 524 Design Note: A receiver is required. Before purchasing, ensure you have access to the receiver/user.

How to program?

1. Open the receiver box. It is located under the motor.

2. Briefly press the programming button (ENR, MEMO, PROG, REC, depending on the model) on the receiver board. The receiver's LED will light up.

3. Press and hold the new remote control for 1 second.

4. Release the button. The receiver's indicator light goes out immediately or within 10 seconds, depending on the model. Your new remote control is programmed. Included in the package: Remote control, Built-in rechargeable battery, User manual (English).