1/5
2-in-1 Water Quality Tester, Digital pH and Chlorine Tester, Portable Cl2 Tester with Large Screen for Swimming Pool and Spa Water Quality Analyzer
Of which environmental contribution £0.10 including VAT.
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by Cuizi
You may also like
Compare with similar items
Product information
Description
2-in-1 Water Quality Tester---A multifunctional water quality tester that can test for chlorine gas or pH value in water via the switch button. Large Screen---The large screen displays clearer and faster readings, which can intuitively determine water quality. Sturdy and Durable---The casing is made of high-quality, thick plastic, strong and wear-resistant, and can be used for a long time. Features---Lightweight, small size, easy to carry. With holes for easy hanging. Advantages---Easy to use, no chemicals required. Can be used to test water quality in swimming pools, spas, etc. Product Description Power Supply: 1 x AA 1.5V battery (not included) Recommended Chlorine Levels for Pools and Less-Passed Water: 1.2~1.7 ppm Recommended pH for Pools and Less-Passed Water: 7.2~7.8 pH Package Includes: 1 x Water Quality Tester ELECTRICAL TESTER INSTRUCTIONS To prolong the life of your PoolChecker PC-102 and ensure accurate results, be sure to: Keep the switch in the OFF position (all the way to "PH") when not in use. Store in a cool, dry place away from sunlight. Do NOT immerse the probe in any liquid other than pool or spa water. Check the battery freshness regularly - the unit requires a 1.5 volt "AA" alkaline battery. CHLORINE CALIBRATION – SET POINT: Before using your electro-tester (ET) for the first time, you must adjust (calibrate) the ET to match your pool or spa water using the following sequence: 1. Test your pool or spa water using a conventional liquid test kit. 2. Record the chlorine reading you will need (example: 1.5 ppm). 3. No adjustment is required for the pH. FINDING YOUR ET ADJUSTMENT POINT A. Insert one 1.5-volt AA battery into the compartment inside the handle (positive side up). B. Hold the ET in one hand and the probe in the other. C. Insert the cleaned metal probes into the water up to the black band. D. Gently stir the water with the probe. E. With the probe still in the water, turn the wheel on the face of the tester fully to the left towards "CL". Slowly turn the wheel to the right until the needle corresponds to the chlorine level you recorded using the liquid tester convention (example 1.5). F. Remove the probes from the water without touching the wheel.
Features
- BrandOTHERS
- Pcs per pack1
- Power sourceBatteries
- Water analysis characteristicsElectronic
- MaterialPlaster
- Analysis typeElectronic
- Tester typePH tester
- Measurement typeElectronic
- ManoMano ReferenceME249583074
- MMID999843749437
- Product codeBT-UK2025YS-148036
- EAN3799938210793
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}