1/5
2 sets of motor drive modules, dual driver controller board, H-bridge for DC stage TB6612FNG
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by Qiudie-homelavafans
You may also like
Compare with similar items
Product information
Description
Features:1. Motor Driver: The dual motor driver module can be applied to DC motors and 4-wire stepper motors, and can also be used to drive two DC geared motors.
2. Safe Operation: Features overcurrent, short-circuit, undervoltage lockout, and overheat protection, with a low-power standby mode.
3. Hard Bridge: The TB6612FNG is a MOSFET-based H-bridge IC, which is much more efficient than a transistor-based H-bridge driver.
4. Easy to Use: The peripheral circuit is simple and does not require an external heat sink, operating stably with high working efficiency.
5. Easy to install: Comes with a compact size and light weight, convenient installation can be completed quickly in minutes.
Specifications:Item Type: Motor Drive Module
Material: PCB
Function: Motor drive control.Voltage: VM connects to 12V, VCC connects to 5V.
Single H-bridge output current: 1.5A
STBY pin: Normal operation when connected to a high level; resets the motor to stop it.
Frequency: Drive frequency up to 100 kHz.
Product size: Approx.21 x 21 mm / 0.83 x 0.83 inches
Package List:Package includes: 2 x motor drive modules
4 x pin connectors
Note:Please supply the power supply according to the operating voltage; using other voltages may cause fire and damage the product.
2. Safe Operation: Features overcurrent, short-circuit, undervoltage lockout, and overheat protection, with a low-power standby mode.
3. Hard Bridge: The TB6612FNG is a MOSFET-based H-bridge IC, which is much more efficient than a transistor-based H-bridge driver.
4. Easy to Use: The peripheral circuit is simple and does not require an external heat sink, operating stably with high working efficiency.
5. Easy to install: Comes with a compact size and light weight, convenient installation can be completed quickly in minutes.
Specifications:Item Type: Motor Drive Module
Material: PCB
Function: Motor drive control.Voltage: VM connects to 12V, VCC connects to 5V.
Single H-bridge output current: 1.5A
STBY pin: Normal operation when connected to a high level; resets the motor to stop it.
Frequency: Drive frequency up to 100 kHz.
Product size: Approx.21 x 21 mm / 0.83 x 0.83 inches
Package List:Package includes: 2 x motor drive modules
4 x pin connectors
Note:Please supply the power supply according to the operating voltage; using other voltages may cause fire and damage the product.
Features
- BrandOTHERS
- ColourMulticolour
- MaterialPlaster
- Motorisation accessory typeControl box
- Motorization useFor gate
- ManoMano ReferenceME242428486
- MMID946214749865
- Product codeQD-GB26Y64492
- EAN5008500144823
You are here:
'/%3E%3C/svg%3E){kind=small}