2-Speed ​​Pool Salt System, Intelligent Control, Chlorine Generator, Cell for Swimming Pool/SPA Tank 100-240V SC 8

Features:1.Intelligent Control: The salt and chlorine generator adopts intelligent control technology, with a start/stop button. The electrode has a self-cleaning function during circulation, and it features a multi-functional protection system including protection against water shortage, overload, high temperature, and generator electrode failure.Short circuit, etc.
2.Safety Functions: The salt chlorine generator has a memory function in case of power failure, memory of the last operating mode, and high/low salt level and fault indicator functions.
3.Construction Housing and Colored Light: The metal controller housing is durable and has good heat dissipation.The generator's transparent housing and colored light indicate operation, allowing for intuitive chlorine production.
4.Easy to install: The controller and generator are designed as an integrated unit, making installation simple and space-saving.The removable, movable structure for cleaning the dynamic metal plates is designed for easy installation and maintenance.2 gears: The inlet and outlet are designed to be in the same horizontal axial plane to minimize pipeline layout.Two-speed chlorine production is optional, which can be selected and adjusted according to needs, saving energy and protecting the environment.
Specifications:Item Type: Salt Chlorine Generator Cell
Material: ABS, Dynamic Plates
Assembled Product Size: 324x120mm / 12.8x4.7 inch
Bottom Mounting Hole Pit: 124mm / 4.9 inch
Round Seal Size: Inner Diameter 48-49mm / 1.9x1.93in
Salinity: 1000-2000-49mm 50-60Hz
Output: DC24V 2A
Product Use: For salt and chlorine cleaning needs in swimming pools, spa pools, swimming tanks, infinity pools, etc.

How to use:Installation instructions: 1. Before use, ensure that the diameter of the pipe to be installed is consistent with the installation diameter of the salt chlorinator. 2. Before installing the chlorinator, close the valves at both ends of the pipe. 3. Before installation, clean any oil stains or brittle in the installation nozzle. 4. The salt and chlorine generator must be installed on the pipeline before the water treatment process returns to the pool and on the bypass pipeline; an adjustable valve must be installed on the main pipe. 5. When installing water pipe joints, use special PVC glue. 7. The chlorinator's power controller must be installed on the power supply with a leakage circuit breaker. 8. The chlorinator must be installed in a well-ventilated location to allow for heat dissipation of the electrical control components. Do not install it in damp or rainy areas. 9. Avoid direct sunlight during use. Otherwise, the product's lifespan will be shortened.
Package List:1 x Xsalt Chlorine Generator Cell

4 x Accessories
1 x Manual

Note:Power start and automatic start refer to the automatic restart of the system when power is restored after a power outage during operation; Last state memory refers to the system operating in the state it was in before being switched off or shut down.