Bostitch RH31R90G50 21 Galvanised Ring Shank Stick Nails 3.1 x 90mm Pack 2000 BOSRH31R9050
'/%3E%3C/svg%3E)
You may also like
Compare with similar items
Often purchased together
Product information
Description
Gauge/Diameter (mm) 3.1
Length 90
21° Collation Angle
Profile RING
Finish G50
Description RH STICK 3.10-90 RING GAL-HD50 2M
Qty per box 2000
Will Fit F21PL-E, N79RH-2
Packs of 2000 Round head nails.
These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads.
Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.
Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
Features
- BrandBOSTITCH
- Length90 mm
- ColourMulticolour
- Tip characteristicRinged
- Product finishGalvanised
- MaterialSteel
- Nail headRing shank
- ManoMano ReferenceME6258
- MMID367504807421
- Product coderh31r90g5090
- EAN5902013925446
Visit the BOSTITCH store'/%3E%3C/svg%3E){kind=small}