260-piece waterproof heat-shrink tubing set – 4 sizes – Polyolefin solder connectors – IP67 water resistance – 260 pieces

General Description: The heat-shrinkable terminal kit includes 260 pieces of various sizes, providing a waterproof and insulating solution for your electrical connections. Each terminal is made of polyolefin with a corrosion-resistant tin ring and hot-melt adhesive inside, ensuring good insulation and water resistance while maintaining optimal internal conductivity. Technical Specifications Operating Temperature: -55 to 125°C Shrink Temperature: 80°C Heat Shrink Temperature: > 160°C Solder Start Temperature: 138°C Solder Dissolution Temperature: 160°C Dielectric Strength: 1 kV Protection Rating: IP 67 Compatibility and Accessories 35 White Heat Shrink Terminals: 1.7 mm diameter, 0.25 to 0.34 mm² conductor cross-section (AWG 26-24) 55 Red Heat Shrink Terminals: 2.7 mm diameter, 0.5 to 1.0 mm² conductor cross-section (AWG 22-18) 45 Blue Heat Shrink Terminals: 4.5 mm diameter, 1.5 to 2.5 mm² conductor cross-section (AWG 16-14) 15 Yellow Heat Shrink Terminals: 6.0 mm diameter, conductor cross-section 4.0 to 6.0 mm² (AWG 12-10) 110 black heat-shrink tubing rolls (non-waterproof, for easy cable connection) Installation: Remove the two cables to be connected and select the appropriate size of heat-shrink tubing. Twist the heat-shrink tubing around one of the wires, then twist the two wires together. Move the connection towards the heat-shrink tubing and ensure that the position does not exceed the range of the hot-melt adhesive at both ends. Heat slowly and evenly with a heat gun until the tubing melts with the wire. Use: Heat-shrink tubing is widely used in various fields such as household appliances, vehicles, ships, and aircraft, facilitating all necessary wire connections. Other information