General Description
Maidodo heat-shrinkable solder lugs are designed to provide reliable and watertight electrical connections. Made of polyolefin with a hot-melt adhesive inside, these lugs guarantee corrosion protection, even in humid environments. They are ideal for marine and automotive applications, allowing for easy installation without crimping. Each connection is secure and insulated, providing protection against electrical leakage and rodent damage.
Technical Specifications
- Minimum Melting Temperature: 138°C
- Minimum Compression Temperature: 80°C
- Operating Temperature: -55°C to 125°C
- Compression Temperature: > 160°C
- Maximum Voltage: 600V
- Dielectric Strength: 1kW
- Protection Rating: IP67
- Shrinkage: 2:1
- Material: PE, Solder
- Quantity: 200 x Red Connectors, 180 x Blue Connectors, 80 x White Connectors, 40 x Yellow Connectors
Usage
To use the terminals, follow these steps:
- Thread a wire through the appropriately sized connector tube and align it correctly.
- Heat both ends of the tube with a heat gun until they shrink.
- Heat the solder ring until it melts and penetrates the wire connection.
- Be careful not to overheat the tube Heat-shrinkable, as this could cause it to melt completely.
'/%3E%3C/svg%3E){kind=small}