2P 32A C curve residual current circuit breaker 6kA EN61009

1) Complete 2-in-1 protection for your circuitsThis 2P 32A modular residual current circuit breaker (often called an RCBO) combines in a single device protection against overloads and short circuits, as well as residual current protection against current leakage. It is designed to secure domestic installations and small commercial premises (shops, offices, furnished rentals, outbuildings) by quickly cutting off the power supply as soon as an anomaly appears. The objective is twofold: to limit the heating of conductors and damage to appliances, while greatly reducing the risk of electric shock in the event of an insulation fault (ageing appliance, humidity, damaged cable, indirect contact). This all-in-one solution is particularly suitable for everyday circuits: sockets, lighting, kitchen, household appliances, air conditioning, and more generally any outgoing circuit where circuit breaker and residual current protection are required without multiplying modules.2) 2-pole format: phase + neutral disconnection, practical in residential settingsThe 2P (double-pole) configuration allows simultaneous disconnection of the conductors of a single-phase circuit (generally phase and neutral), which provides real practical benefits in operation: clearer power isolation, easier fault diagnosis, and increased safety during intervention. In an electrical consumer unit, this type of device is easily integrated as a replacement for a conventional circuit breaker + residual current switch setup when space saving, simplified wiring and dedicated protection per circuit are desired. In renovation as well as fit-out (studio, rental property, small shop), the 2P is often preferred for sensitive outgoing circuits (kitchen, utility room, damp rooms) or for circuits where a zone needs to be isolated quickly without impacting the rest of the installation.3) Electrical characteristics suited to common uses (C curve, 6 kA)With a rated current of 32 A, this residual current circuit breaker is intended for outgoing circuits capable of handling significant power (for example certain dedicated circuits: air conditioner, water heater, sockets dedicated to an appliance, depending on conductor sizing and circuit design). The C tripping curve offers a good compromise: it better tolerates inrush currents when starting usual equipment (motors, compressors, household appliances) while tripping reliably in the event of abnormal overcurrent. The 6 kA breaking capacity meets common needs in residential and small commercial settings, ensuring safe interruption in the event of a short circuit. The whole unit operates at 50/60 Hz, which guarantees compatibility with the most common networks.4) Wide voltage range and European standards complianceThe device is rated for use in AC 230–400 V, covering the power supply configurations generally encountered (single-phase 230 V and environments where distribution may present other levels within this range). It is stated to comply with EN 61009, the European reference standard for residual current circuit breakers combining overcurrent protection and residual current protection. For the user, this indication makes it easier to choose a product aligned with the technical requirements expected in a modular consumer unit, and provides a clear reference point when upgrading an installation (renovation, extension, making a circuit safe again). This compliance is particularly sought after for areas with increased risk (kitchen, bathroom, utility room, garage, basement), where residual current protection is a major advantage.5) Installation in the consumer unit: space saving, simplified maintenance, everyday safetyInstalling a combined residual current circuit breaker helps reduce the space taken up in the enclosure and simplify wiring compared with a separate solution. In the event of repeated tripping, analysis is often more straightforward: tripping linked to an overload (too many appliances running simultaneously), to a short circuit (hard fault), or to an earth leakage (damp appliance, deteriorated insulation, damaged conductor). For reliable operation, it is recommended to size the 32 A rating consistently with the wire cross-section, line length and actual use of the circuit: a rating that is too high compared with the conductors can increase the risk of overheating. Typical mounting on a DIN rail in a consumer unit, in a dry and ventilated environment. This product therefore provides a robust and rational solution for improving electrical safety while maintaining simple everyday use.