2P 80A Automatic Transfer Switch – Millisecond Timing Controller AC230V 50/60Hz for Solar and Grid Systems

1. SAFE AND FIRE-RETARDANT MATERIAL: This automatic transfer switch is made of excellent flame-retardant PC material, has good insulation, is resistant to high temperatures and aging, and is safe and reliable. The use of silver contacts can greatly improve the conductivity and lifespan of the product.
2. TWO OPERATING MODES: The power transfer switch supports automatic or manual operation, has a compact structure, reliable transmission, convenient installation and maintenance, and a long service life.
3. STANDARD 35MM RAIL MOUNTING: The dual-power automatic switch is a miniature household power switch, primarily used to test whether the main or backup power supply is functioning correctly to ensure continuity, reliability, and power safety. Designed for rail mounting, specifically for PZ30 distribution boxes.
4. MILLISECOND-LESS SWITCHING: The automatic transfer switch is very useful; when the main power supply malfunctions, the backup power supply activates immediately, and the power supply is switched over in milliseconds without interruption.
5. APPLICABLE SCENARIO: The power transfer switch switches to backup power during a power outage and back to the main power supply when power is restored. Suitable for 230V 50 or 60Hz AC backup power systems, it is widely used in various locations where a continuous power outage is unacceptable, such as factories, shopping malls, nurseries, etc.

Specification:

Item Type: Automatic Dual Power Transfer Switch.
Material: PC, Silver
Insulation Voltage Ui: AC690V
Rated Voltage Ue: AC400V
Rated Operating Voltage: 230VAC
Rated Control Voltage Us: 220VAC 85% to 110% Us
Level: PC Level
Specifications: 2P
Lifespan: electrical: 2000 times; Mechanical: 5000 times
Rated short-circuit current: 50kA
Fuse: RT16-00-63A
Rated impulse withstand voltage: 8kV
Auxiliary circuit: two relays, each relay has two sets of contacts. Capacity: AC220V50HZ le=5y
Contact time: Operating transition time: Return time: Off time:

How to use:

Take out the product and follow the operating instructions.

Package list:

1 x Dual-power automatic transfer switch

1 x User manual

Note:

1. The maximum ambient temperature must not exceed 40°C, the minimum temperature must not fall below -5°C, and the average temperature over 24 hours must not exceed 35°C. 2. The altitude of the installation site must not exceed 2000 meters. 3. When the maximum temperature reaches 40°C, the relative humidity of the installation site must not exceed 50%; when the temperature is as low as -5°C, the relative humidity is higher; for example, if the temperature is 25°C, the relative humidity is 90%. Special measures must be taken to address occasional condensation on the product surfaces due to temperature changes.