1/5
2P DC1000V Fireproof Modular Photovoltaic Surge Protector with 35mm Guide Rail for Residential and Office Buildings, A
Of which environmental contribution £0.10 including VAT.
Sold by Cuizi
You may also like
Compare with similar items
Product information
Description
General Description The modular 2P DC1000V photovoltaic surge protector is designed to protect electrical installations against overvoltages. With a rapid nanosecond response, it opens immediately to direct the overvoltage to ground in the event of an incident. This device is ideal for use in various environments such as homes, offices, schools, and shopping centers. Technical Specifications Rated Voltage: 1000 V DC Maximum Continuous Operating Voltage Uc: 1060 V DC Rated Discharge Current: 20 kA (8/20 µs) Maximum Discharge Current Imax: 40 kA (8/20 µs) Voltage Protection Level: 3.2 kV Number of Poles: 2P Degree of Protection: IP20 Operating Temperature: -40 to 80 °C Humidity: 90% (at 25 °C average) Installation This surge protector is mounted on a standard 35 mm guide rail, which simplifies installation. It is recommended to disconnect the power supply before installation and follow the provided wiring diagram to avoid any connection errors. When using the protection module, it is essential to regularly check the fault display window. If the window turns red or an alarm signal is emitted, this indicates that the module needs to be repaired or replaced. Also, ensure that the circuit breaker is closed after installation and that the module is functioning normally. Other information
Features
- BrandOTHERS
- Voltage10 V
- Amperage10 A
- Type of electrical installationSurface mounted
- ManoMano ReferenceME220736711
You are here:
'/%3E%3C/svg%3E){kind=small}