2pcs 433M Remote Garage Door Opener with Keyring, Universal Sensitive Plastic, Chips Could Be Copied
You may also like
Compare with similar items
Product information
Description
【Code cleanup method】Press the unlock button and the lock button simultaneously (some models have the up and down buttons). After the LED indicator flashes three times, release one button while holding down the other. Then, press the released button three times. The LED indicator will enter a rapid flashing mode. At this point, all memory data is erased. The cleaned remote will not have an illuminated LED indicator, regardless of which button you press.【Wireless radio frequency technology】Adopting wireless radio frequency technology, the transmission distance is long, non-directional, the transmission sensitivity is high and there is no signal blocking.
[Four buttons] The four buttons could copy four different types of chips respectively, i.e. one remote control can operate four different types of installations. Faster data copy speed, less risk of code loss, long range.
[Copy Method] One hand holds the original remote, while the other holds the copy remote. Both remotes should be placed as close as possible (ideally, place them side-by-side on the desk with no distance between them). Press the copy button on each remote. When the LED indicator flashes rapidly after three flashes, the copy is successful. Other key operating methods are the same.
[The chips can be Copied] 2260 (All manufacturers); 2262 (All manufacturers); PT2264, 5326 (All manufacturers); SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series, 527 (All manufacturers); 1527 (All manufacturers); 2240 (All manufacturers); HCS101, HCS200 (part code), HCS300 (part code), single-chip microcomputer.
Features
- BrandYS-YALOTRS
- Length15 cm
- Width15 cm
- Height35 cm
- Weight2000 g
'/%3E%3C/svg%3E){kind=small}