2PCS Gate Remote Control for CARDIN S449-QZ2 Pre-coded 433 MHz, 2 Channels Remote Control Gate Opening, Replaces model TXQ4492P0

Compatibility: Remote control for Cardin S449-QZ2, replaces model TXQ4492P0. Batteries are included with the remote, which is ready to use upon receipt. Instant Installation: Quickly and securely copy the original remote face-to-face. If code copying fails, you can first clear the code and then simultaneously press both buttons on the new remote until the LED flashes rapidly. (See description for detailed steps) Reliable 433.92 MHz Frequency: Operates on a stable frequency (433.92 MHz) for interference-free transmission, ensuring precise opening/closing of your gate every time. The product includes: garage door remote control, instruction manual. If you encounter any problems (pairing/frequency/model) after purchasing the remote control, please feel free to contact us. Compatibility: Remote control for Cardin S449-QZ2, replaces model TXQ4492P0. Batteries are included with the remote control, which is ready to use upon receipt. Instant Installation: Quickly and safely copy the original remote control face-to-face. If the code copying fails, you can first clear the code and then simultaneously press both buttons on the new remote control until the LED flashes rapidly. (See the description for detailed steps.) (See description for detailed steps) Reliable 433.92 MHz Frequency: Operates on a stable frequency (433.92 MHz) for interference-free transmission, ensuring precise opening/closing of your gate every time. The product includes: garage door remote control, instruction manual. If you encounter any problems (pairing/frequency/model) after purchasing the remote control, please feel free to contact us. Product Specifications: Frequency: 433.92 MHz. Number of Buttons: 2 channels. Battery Type: CR2032 battery. Compatible Models: FOR S449 QZ2 FOR S449 QZ1 PS: Not compatible with other brands and frequencies. Hidden Button: Used to activate remote learning. Main unit functions: Long press, the main unit will beep and turn on; the hidden button eliminates the need to press the main unit's learning button. Programming is very simple: the remote control works exactly like the original remote. After receiving the remote, it must be programmed with the original receiver according to the instructions. 1. Locate the learning/code setting button on the motor. It is usually located under the lampshade or on the back of the motor. 2. Press the learning/code setting button once and release it. The indicator light should then illuminate. 3. Press the desired transmitter button once, and the indicator light will turn off. 4. Press the transmitter button again. The indicator light on the motor will flash up and down, indicating that the transmitter has been programmed. 5. Test the remote control's operation.