3-in-1 Oscilloscope Multimeter Signal Generator Machine, 3.2-inch IPS Screen Oscillometer, 120 MHz Bandwidth, 250 MSa/s Sampling Rate, Dual-Channel Oscillometer

Warning: Keep the product away from children's toys and other items to prevent accidental ingestion or choking by children. With its 3-in-1 design, this product ingeniously integrates the functions of a digital oscilloscope, multimeter, and signal source into a single device. It features a 3.2-inch IPS display, a 120 MHz bandwidth, and a 250 MSa/s sampling rate. Three trigger modes are available: automatic, single, and normal. Its multifunctional design supports sensitivity and time base adjustment, automatic mode selection, 2-channel waveform analysis, cursor measurement, reference waveforms, FFT spectrum, waveform saving, and waveform display. It also includes DC/AC voltage, DC/AC current, resistance, capacitance, diode, and continuity testing. The built-in waveform generator can produce sine, square, triangular, and other waveforms.

Features:
【3-in-1 Design with IPS Screen】: This product ingeniously integrates the functions of a digital oscilloscope, multimeter, and signal generator into a single device. It features a clear 3.2-inch IPS screen with high-sensitivity, full display, and channel 2 waveforms can be set to green/cyan/purple.
【Signal Generator】: Built-in waveform signal generator, it can produce sine waves, square waves, triangle waves, etc. The voltage amplitude is 2.5V, the frequency is adjustable from 0 to 2 MHz, and the square wave duty cycle is adjustable from 1% to 99%.
【High-Precision Multimeter】: Built-in True RMS multimeter, which supports quick software calibration. Features DC/AC voltage, DC/AC current, resistance, capacitance, diode, and continuity testing. When measuring low voltage/resistance/continuity, the oscilloscope and multimeter functions can be used simultaneously (small window in the upper right corner).
【Digital Oscilloscope Function】: Dual-channel oscilloscope function with a 120 MHz bandwidth and a 250 MSa/s sampling rate. Includes a perfect trigger function (automatic, single, normal). Supports sensitivity and timebase adjustment, automatic mode setting, 2-channel waveform analysis, cursor measurement, reference waveforms, FFT spectrum, reference waveforms, waveform recording and display. 【Sensitivity and Time Base】: The oscilloscope will automatically detect the signal and adjust the ranges. It supports manual adjustment of the waveform vertically and horizontally. Vertical sensitivity indicates the voltage in the vertical direction and is adjusted using the mV and V buttons to accommodate different voltages. Time base represents time in the horizontal direction and is adjusted using the S and NS buttons to accommodate different frequencies. In standby mode, the user can move the waveform left and right.
【Two Automatic Modes】: Supports one-button automatic and fully automatic modes. No complicated operation is required; you can quickly detect and display the waveform. In fully automatic mode, no keystrokes are required, and continuous automation is performed.
【High Bandwidth & Sampling Rate: The real-time sampling rate is 250 MSa/s, and the bandwidth in dual-channel mode is halved to 60 MHz.
【Dual Channel】: With dual-channel mode, it can measure and display two signal waveforms simultaneously for waveform comparison and analysis.
【XY Mode for Cursor Measurement】: XY mode is an imaging technique formed by combining the waveforms of two channels and is commonly used to display the phase difference or frequency relationship between two signals. It supports X and Y cursor measurement. The horizontal cursor can be used, for example, to measure the interval time between two pulses. The vertical cursor can be used to measure voltage and voltage difference at two locations. 【FFT Spectrum】: FFT (Fast Fourier Transform) is an algorithm that transforms waveforms in the time domain to the frequency domain, which can be used to analyze the frequency component of waveforms. Linear and logarithmic displays are supported. Note: FFT can only display spectrograms; frequency measurement is not supported.
【Reference Waveform】: Supports reference waveform locking, statically displaying the current waveform on the screen while dynamic waveforms continue to update normally. This can be used for reference and comparison between multiple waveforms.
【Waveform Recording/Display】: Record the screen waveform with a single click. Access the image navigation page, click on the thumbnail for full-screen viewing, and delete unwanted waveform graphs at will.
【Safer Design】: Uses an isolation transformer and an isolation optocoupler chip to isolate the multimeter from the oscilloscope, so you don't have to worry about common ground wiring. (When measuring high voltage, the multimeter and oscilloscope cannot be used simultaneously.)
【Wide Applications】: It can easily handle measurements in various fields, widely used in electronic circuit testing and debugging, troubleshooting, and repair.

Specifications:
Name: 3-in-1 Digital Oscilloscope
Material: ABS
Display: 3.2-inch IPS color screen
Battery: 1 * Built-in 2500mAh rechargeable lithium battery(included)
Charging: TYPE-C 5V
Language: Chinese/English

Oscilloscope:
Real-time sampling rate: 200 MSPS
Analog bandwidth: 120 MHz (CH1 only) 60MHz (CH1+CH2)
Equivalent Sampling Rate: 500M
Rise Time: <3ns
Storage: 128KB
Impedance: 1MΩ
Time Base: 5ns - 10s
Peak Voltage: +40V (1x), ±400V (10x)
Trigger Mode: Auto/Normal/Single
Trigger Type: Rise/Fall
Display Mode: YT/XY/Roll
Persistence: None/1s/∞
Mode Automatic: OneKey-auto/Fully automatic
Sensitivity: X1: 10 mV/div ~ 10 V/div; X10: 100 mV/div ~ 100 V/div
Measurement Elements: 14 types
DC Offset: ±2%
XY Mode: Yes
Screenshot: Yes
Frequency: ±0.01%
Zoom Mode: Yes
FFT: Yes
Generator Waveforms: Sine/Square/Triangle
Generator Voltage: 2.5V + 0.05V
Generator Frequency: 1Hz-2MHz

Multimeter:
DC Voltage: 600 mV/6.00 V/60.0 V/600 V/750 V, ±(0.5%+3)
AC Voltage: 600 mV/6.00 V/60.0 V/600 V, ±(1%+3)
DC Current: 600 mA/10 A, ±(2%+5)
AC Current: 600 mA/10 A, ±(3%+5)
Current rating: 600 mA hole with 1 A fuse, 10 A hole without fuse
Resistance: 600.0 Ω+(1.5%+3); 6.000kΩ/60.00kΩ/600.0kΩ+(1%+3); 6.000ΜΩ, ±(1.5%+5); 60.00Ω, ±(3%+3)
Capacitance: 60.00nF/600.0nF/6.000μF+(5%+5), 60.00μF/600.0μF+(10%+5)
Diode: 0.0V ~ 3.3V, 3.3V top display OL
Continuity: Sound at 50Ω and below

Item Size: 145 * 86 * 32 mm / 5.71 * 3.39 * 1.26 inches
Package Size: 220 * 150 * 70 mm / 8.66 * 5.91 * 2.76 inches
Package Weight: 600 g / 1.32 lb

Package List:
1 * 3-in-1 Digital Oscilloscope
1 * Pair of Test Pens
2 * Cables
1 * Charging Cable
1 * Accessory Set
EAN: 763755581322
EU Responsible Party
YOOVEI TECHNOLOGY
118-130 avenue Jean Jaures 75169 Paris CEDEX 19
MichelleWangYurui@gmail.com