3-in-1 Water Tester TDS/EC/PPM Backlit Display, for Aquarium, Swimming Pool, Drinking Water
You may also like
Compare with similar items
Product information
Description
Drinking water tester measurement range: conductivity: 0-9999 µS/cm, TDS: 0-9999 ppm, Celsius: 0.1-80.0°C, Fahrenheit: 32.0-176.0°F, accuracy: ±2%.
Three-in-one water quality tester: The drinking water TDS meter consists of a TDS meter, an EC meter, and a thermometer.
It can measure fertilizer concentration, impurity levels, water temperature, etc., making it convenient for vegetable gardening or aquaculture. Auto-off function: The EC meter saves measurements for easy reading and recording, and turns off after 5 minutes of inactivity to conserve battery power. Multi-mode switching: Press the Shift key to switch between TDS and conductivity, and the meter displays the factory default TDS value. Press the Shift key twice to switch between Celsius and Fahrenheit. The meter is factory preset to Celsius.Multifunctional: The TDS meter is suitable for home and laboratory water quality testing, such as drinking water, tap water, aquariums, ponds, swimming pools, filtered water, and bottled water.
Calibration Function: When the measurement is inaccurate, a calibration measurement can be performed. (Supplied factory calibrated. Calibration solutions not included)
EC Meter Calibration Method: 1. Prepare the tools: known solution. 2. Press the first on/off button to turn on the device. 3. Remove the electrode protective cover. 4. Place the electrode in a solution of known value and gently stir the solution to remove air bubbles around the electrode. 5. In detection mode, press and hold the center button for 5 seconds, then press buttons 1 and 3 to adjust the known solution value from top to bottom. This completes the calibration.
Features
- BrandOTHERS
- IP ratingIP65
- Power sourceBatteries
- ManoMano ReferenceME220752694
- MMID747078085660
Pool maintenance products buying guide
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E){kind=small}