CCYKXA 3 in 1 Soil Tester, Soil pH Tester, Soil Moisture Meter, Soil Light Intensity Tester, 3 in 1 Soil Tester for Garden and Agriculture (No Battery Required)

about this product:
[SOIL TESTER]: 3 in 1 soil pH tester allows you to use scientific methods to measure light, moisture and soil pH. You can adjust the environment for plant growth over time.
[PORTABLE DESIGN]: The soil moisture meter does not require a battery, more environmentally friendly, just insert the probe (at least 10 cm deep) into the target soil to get accurate data. Lightweight and portable design, easy to carry for outdoor use.
[3 IN 1 FUNCTIONS]: 3-in-1 soil tester for garden management, shrubs, flowers, vegetables, plants, etc. Double needle detection technology greatly improves the speed and accuracy of soil pH detection and analysis.
[SCIENTIFICALLY ACCURATE]: Very easy and accurate reading of moisture, pH and light levels. The 3 in 1 soil tester can measure soil moisture from 1 to 10, read light intensity from 0 to 2000 and read pH value between 3.5 and 8.
[NOTICE]: This soil tester is not used to test water pH, it can only be used for soil. Please note that the metal probe should be wiped after use to keep the probe dry and clean.


Product Description:
Color:Green-02L.
3-in-1 Soil pH / Moisture / Light Tester.
STEP:
1: Switch to moisture / pH / light as needed;
2: Insert two-thirds of the soil (above 10 cm).
3: Adjust the probe until the pointer on the dial swings slightly;
4: Check the moisture / pH / light level in the dial after 10 minutes;
5: Remove the probe from the soil and wipe it after each use.
6: [WET] Values 1-3 indicate that watering is necessary, 4-7 indicates that the humidity is moderate, 8-10 indicates that it is too wet.
7: [LIGHT] the measuring range is 0-2000. The higher the value, the stronger the light intensity, according to the needs of the plant to adjust the shade.
8: [PH] the corresponding table is 8-3.5, the value of 7 is neutral, the smaller the value, the more acidic the soil.
9: No battery needed.

NOTE:
Do not force it into very hard soil or touch hard objects;
Do not use it to test pure water or other liquids;
Do not leave the meter in the soil for a long time; If the soil is too dry and the indicator does not move, water it before testing.
The pH measurement value of this instrument is between 8 and 3.5. If the tested soil environment is alkaline above 8 or acidic below 3.5, because the working range of the instrument has been produced, the detection instrument may not work normally!

PACKAGE INCLUDES:
Soil pH / Moisture / Light Tester * 1.