3 Pack Anti-Peek Window Film, Opaque Electrostatic Window Film for Privacy Window Office Home Bathroom Bedroom Kitchen (60 x 200 cm, Matte White)

GOOD PRIVACY PROTECTION - High quality anti-peeping window film with frosted design, at a distance of 0.5 meters, the privacy protection effect can be more than 98% while allowing light to pass through.

NO GLUE, ELECTROSTATIC GLASS FILM - Blackout film, easy to apply and remove, without leaving residue or releasing harmful substances. So can be reused if not damaged or smeared.

ULTRAVIOLET RESISTANT - Blocks 85% infrared rays and 96% UV rays. Prevents heat from entering in summer and locks it in in winter. Thus reducing the fading and aging of indoor furniture. Also protects our skin from damage. Window film made of premium vinyl, heat and steam resistant and durable quality.

EASY TO APPLY - All you need is clear water (soapy water would be best) to apply the opaque window film. Remember to remove the protective film before applying it on the glass. Reusable, can be applied multiple times, will not fade over time.

WIDE APPLICATION - Widely suitable for all places: kitchen, bedroom, bathroom, living room, dining room, office, hotels, classroom, lobby. Clever suggestion from another customer: 1) Use a hairdryer to soften the film in winter before applying. 2) Milk white film for office, bedroom and living room, and milk white film for bathroom. p>

Product Description

Film offers an elegant, opaque style to ensure your safety.

It ensures your privacy while allowing the sun's rays into your home.

The film blocks up to 96% of UV rays, protecting your skin from the sun's rays.

It is easy to apply and you don't need any tools; only water is required to apply the film.

It is an easy way to decorate your home in an elegant way.

This anti-peeping window film is economical and will last for several days years after installation.

Spray the film with plenty of water.

Installation Instructions

Clean the window or glass.

Wet the window or glass thoroughly with water.

Remove the window film from the backing film (make sure you have removed it before applying the film to the glass).

Apply the film to your window with the correct side: the one (smooth surface) that the protective film will be stuck to.

Remove any air bubbles and trim off the excess film around the window.