30A 12V/24V Intelligent Battery Solar Panel Charge Controller Regulator with 5V Dual USB Ports and LCD Display (30A)

General Description

The 30A intelligent solar battery charge controller is designed to automatically adapt to 12V and 24V lead-acid batteries.It is essential to ensure the battery has sufficient voltage during initial installation so the controller can recognize the correct battery type.This controller is specifically designed for various types of lead-acid batteries, including flooded, sealed, and gel batteries, and should not be used with other battery types such as lithium or nickel-hydrogen batteries.>

Technical Specifications

• Operating Voltage: 12V/24V
• Maximum Current: 30A
• Size: Approx. 133 x 70 x 31 mm
• Display: LCD Screen
• Charge Management: 3-Stage PWM

Installation

For optimal installation, place the controller as close as possible to the battery to avoid voltage drop due to excessively long wires. Also, ensure that you install the controller on a flat, well-ventilated surface.

Usage

The controller should only be used with photovoltaic panels as a charging source.It is easy to set up and use thanks to its LCD screen which clearly displays the status and data.Charging and discharging parameters are adjustable, and the charging operating mode can be set according to your needs.

Other Information

• Built-in protection against overcurrent, short circuits, open circuits, and reverse connections, all of the self-recovery type
• Dual MOS anti-reverse circuit with ultra-low heat generation
• Extends battery life and maintains the charge during operation