1/5
3/4" Water Pressure Reducer - With Pressure Gauge and Mesh Filter - For Garden Taps, Irrigation and Gas Heating
Of which environmental contribution £0.10 including VAT.
Sold by Cuizi
You may also like
Compare with similar items
Product information
Description
Material: Made of 100% high-strength brass, robust and durable, not easy to rust, designed to last for many years, even under high pressure and high temperature. Design: With its piston structure and pressure adjustment knob, this pressure reducer is easy to connect to the tubing, and the pressure can be freely adjusted. Pressure gauge included: The water pressure reducer kit comes with a pressure gauge so you can easily and clearly check the pressure. Versatile: This 3/4" pressure reducer withstands a pressure of 1.6 MPa and can be installed before most tap water fixtures. It is suitable for many homes, buildings, and factories. After-sales service: If you are not satisfied after receiving the pressure reducer, please contact us promptly, and we will respond within 24 hours. Features: Our water pressure regulator is made of brass, making it durable and rust-resistant. It features a 3/4" fitting (with half-screw) and a pressure gauge (10 bar). There is an adjustment knob on top to set the water pressure as needed. Pressure reducers protect domestic water systems from excessive water supply pressures common in residential and industrial areas. Prevent pressure damage and reduce water consumption. The set pressure remains constant even when the pre-pressure fluctuates significantly. It is suitable for scenarios where hydraulic pressure is unstable, water flow is too rapid, and is used in water purifiers, solar power systems, gas heaters, faucets, etc. Specification: Material (body): Brass Medium: Water Interface: 3/4" (with half-screw) Filtration accuracy: 10-60µm Applicable water pressure: 0.1-0.6 MPa (0-87 psi) Maximum air inlet pressure: 1.0 MPa Applicable temperature: 4°C-40°C Pressure gauge: 1 MPa Valve body size: 14.4 × 10.5 × 15.4 cm Interface size: G3/4 (DN20) Package contents: 1 × Water pressure reducer 1 × Pressure gauge
Features
- BrandOTHERS
- Connection configurationF-F-M
- Pipe thread size1/4" (8x13)
- MaterialBrass
- Pressure5 bar
Advice from
How to control water pressure?
Pressure reducers, booster pumps, pressure switches, meter regulators and pressure gauges are all required for the proper operation and control of water pressure in individual dwellings and buildings. To avoid too low or too high water pressure, follow the advice in this guide!
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}