3/4" Water Pressure Reducer with Pressure Gauge and Mesh Filter for Irrigation and Gas Heating Taps

Material: Made of 100% high-strength brass, sturdy and durable, not easy to rust, designed to last for many years, even under high pressure and high temperature. Design: With its piston structure and pressure adjustment knob, this pressure reducer is easy to connect to the pipe, and the pressure can be freely adjusted. Pressure Gauge Included: The water pressure reducer kit comes with a pressure gauge so you can easily and clearly check the pressure. Versatile: This pressure reducer withstands a pressure of 2.5 MPa and can be installed before most tap water fixtures. It is suitable for many homes, buildings, and factories. After-Sales Service: If you are not satisfied after receiving the pressure reducer, please contact us in time, and we will reply within 24 hours. Features: Our water pressure regulator is made of brass, durable and rust-resistant. Water pressure regulator with a 3/4" (with half-screw) connection and a pressure gauge (10 bar). An adjustment knob on top allows you to set the water pressure as needed. Pressure regulators protect domestic water systems from excessive water supply pressures common in residential and industrial areas. Prevent pressure damage and reduce water consumption. The set pressure remains constant even when the pre-pressure fluctuates significantly. It is suitable for scenarios where water pressure is unstable, the water flow is too rapid, and is used with water purifiers, solar energy systems, gas heaters, faucets, etc. Specification: Material (body): Brass; Medium: Water; Interface: 3/4" (with half-screw); Filtration accuracy: 10-60µm; Applicable water pressure: 0.1-1 MPa; Maximum air inlet pressure: 2.5 MPa; Applicable temperature: (-10°C) - 60°C Valve body size: 14.4 × 10.5 × 15.4 cm Interface size: G3/4 (DN20) Package contents: 1 × water pressure reducing valve 1 × pressure gauge