3.7V Waterproof Solar-Powered Ultrasonic Animal Repellent Bird Repellent Flashing Light for Garden

1. Repels animals and creatures by emitting ultrasonic waves, an alarm, and a flashing LED light when powered.
2. The animal repellent is safe, environmentally friendly, and chemical-free, making it harmless to both humans and animals.
3. The waterproof animal repellent allows you to place it outdoors in all weather conditions, as it will not be affected by the elements.
4. The solar-powered animal repellent can protect farms, gardens, yards, lawns, patios, and garages from pests and vermin.
5. You can place the bird repellent on the ground or attach it to the wall and charge it; it will work automatically.

Specification:

Item Type: Animal Repellent
Material: ABS
Weight: Approx. 331g / 11.7oz
Product Size: Approx. 15x12x5cm / 5.9x4.7x2.0in
Solar panel: 5.5V, 120mA (0.66W)
Power supply: 3.7V, 2200mAh lithium battery (battery included)
Detection type: optical sensor + pyroelectric infrared sensor
Operating current: 190mA (different sounds have different currents)
Standby current: ≤1mA
Speaker loudness: 85dB
Ultrasonic frequency: 25kHz and 40kHz alternate every 3 seconds
LED light intensity: 1800mcd
Indicator light: red LED means it is working, blue LED means it is charging
Charging current: 375mA (charger selection: 5V, 500mA-1A)

How to Use:

1. Turn on the switch. 2. After turning on the switch, the infrared sensor head will remain active. 3. When the switch is on, the red indicator light will illuminate, and the ultrasonic signal will operate for 15 seconds. During this time, sound waves lasting 2.5 seconds will be generated. Simultaneously, the white light will flash rapidly. After 15 seconds, the product will enter standby mode.

Package List:

1 x Animal Repellent

2 x Screws

2 x Accessories

1 x Manual

Note:

1. Please place the device as far away from human life as possible. 1. Do not install the device in a play area where children and babies play. 2. Do not cover the PIR sensor. 3. To clean the equipment, use mild, damp soap and water. Do not use harsh chemicals or abrasive cleaners that could damage the equipment. 4. In winter, if there is snow on the surface of the solar panel, please clean it promptly to facilitate normal charging. 5. The detection distance depends on the ambient temperature. If the ambient temperature is close to or above human body temperature, the detection distance will be shorter. Conversely, if the ambient temperature is lower, the detection distance will be longer. 6. During the day, different intensities of sunlight will affect charging efficiency, so the same charging time may result in different discharge times. The same applies in winter and summer. 7. We recommend a charging time of 4 to 5 hours, or you can wait until the charging indicator light turns off.