3pcs 433 Metal Four Button Electric Garage Door Keys Universal Remote Control

Universal copy remote control

433.92 Mhz for gates, garages...

You now only have one remote control for your gate, parking lot or garage door! Each button is independent and can memorize a different remote control. Don't wait until it breaks down, make a duplicate of your remote control.

Opt for this universal copy remote control for the automatic doors of your garage, gate, window, light, etc.

To configure it, nothing could be simpler! Simply place the 2 remote controls next to each other and press the 2 buttons at the same time for the duration of synchronization. Once the blue button is lit, your remote control is ready to use!

See the complete list of compatible remote controls

The universal remote control can copy up to 4 different codes and will allow you to duplicate your old remote controls in just a few seconds!

Compatible with 90% of remote controls operating with a frequency of 433.92 Mhz.

Features

Power supply: 1 battery.

Signal range: 100m (without obstacles).

Signal frequency: 433.92 Mhz.

Included: Battery and instructions in French.

Complete list of compatible remote controls available.

WARNING:

Not compatible with rolling code remote controls.

Universal Copy Remote Control 433.92 Mhz for Gate, Garages, Alarms, Universal Remote Control Duplicator

Reset

To reset, press both buttons 1 and 2 of the code copy remote control at the same time for about 10 seconds.

You will see the blue light flash quickly for about 2 seconds then flash more slowly, this means that the remote control is reset.

You can then release the buttons. When you press one of the two buttons after this step the blue light will no longer flash.

Copy the code

Place the copy remote control and the one to be copied opposite each other

First, press and hold one of the buttons on the copy remote control, the blue light will appear once then also press and hold one of the buttons on the remote control to be copied. If the blue light shines continuously, the operation is successful.

Repeat the same operation to copy other buttons.

PS: If no light appears after 15 seconds, try again