4-channel remote control for gates and garage doors – Compatible with motor 1841064 – 433.42 MHz frequency – 2-pack

REPLACEMENT REMOTE CONTROL: This garage door remote is a replacement part, not an original part. Please check your device's compatibility list before purchasing. Note that our garage door remotes are not compatible with Kgo IO models that have green LEDs. COMPATIBILITY: This garage door remote is compatible with Kgo 4, Ktis NS 2, Ktis NS 4, Ktis 2, Ktis 4, and 1841064. Batteries are included, and the remote is ready to use. FREQUENCY: Ensure your original remote operates at 433.42 MHz and is compatible with the remote we offer. 4 CHANNELS: This garage door remote has 4 channels at 433.42 MHz for efficient control of your garage door opener. CUSTOMER SERVICE: If you experience any problems after purchasing the remote, please contact us. REPLACEMENT REMOTE CONTROL: This garage door remote control is a replacement part and not an original part. Please check your device's compatibility list before purchasing. Please note that our garage door remotes are not compatible with Kgo IO models with green LEDs. COMPATIBILITY: The remote is compatible with Kgo 4, Ktis NS 2, Ktis NS 4, Ktis 2, Ktis 4, and 1841064. Batteries are included, and the remote is ready to use. FREQUENCY: Ensure your original remote operates at 433.42 MHz and is compatible with the remote we offer. 4 CHANNELS: The garage door remote has 4 channels at 433.42 MHz for efficient control of your door opener. CUSTOMER SERVICE: Please contact us with any questions or problems after purchasing the remote.

Product Description

Frequency: 433.42 MHz

Number of Buttons: 4

Battery Type: CR2032

Compatible with:

K-go 4, Ktis NS 2/4, Ktis 2/4 4

Not compatible with other brands and frequencies.

Programming?

Programming a Transmitter.

1. Press the PROG button on the receiver (for 2 seconds) until the indicator light illuminates to enter programming mode.

2. Briefly press the PROG button on the back of transmitter A or the memory button on transmitter B; The indicator light is flashing.

Note: You can enter programming mode if a remote control is already stored in the receiver by pressing and holding the PROG button on the remote control until the indicator light illuminates. You can then register a new transmitter.