4-in-1 Wall Detector, Metal Wall Detector with LCD Screen, Stud Detector for Electrical Cable Detection, Wall Scanner for Wood, Metal, and AC Wires

Wide Application: This finder can be used to detect the center position of wood studs in wood paneling and drywall, as well as the position of metal and AC cables, so you can accurately install TVs, cabinets, drill holes in walls, etc.

4-in-1 Detection Mode: This stud finder has 4 different modes that can be switched: stud scanning, deep scanning, metal scanning, and AC scanning.

Multifunctional: The stud scanning function is used to find and locate the center and edge of wooden and metal studs up to 19mm deep; the maximum positioning depth of the EPScan is 38mm; the maximum metal detection depth reaches 60mm; AC scanning can detect AC wires up to 51mm deep.

Screen display and alarm prompt: During the detection process, the display screen indicates the detection mode, signal strength, direction, etc. Additionally, the buzzer intensity will vary depending on the distance between you and the target; you can mark the position with a marker when it is strongest. It also has an AC warning function.

Easy to calibrate: You must calibrate the detector before each scan. First, select the mode, then press and hold the scan button (on the right side of the tool) to calibrate the tool. Calibration is complete when the gradient bar disappears and a beep sounds. In metal/AC mode, you must hold it in the air for calibration.

Product Description

Wide Application

This finder can be used to detect the center position of wood studs in wood paneling and drywall, as well as the position of metal and AC cables, so you can accurately install TVs, cabinets, drill holes in walls, etc.

How to Calibrate

You must calibrate the detector before each scan. First, select the mode, then press and hold the scan button (on the right side of the tool) to calibrate the tool. Calibration is complete when the gradient bar disappears and a beep sounds. If you accidentally shake the scanner, you will need to recalibrate the device. In metal/AC mode, you must place it in the air for calibration.

Specification

Color: Black and Silver

Package Includes:

Wall Detector*1

Battery*1