4-Way LED Light Harness For maXpeedingrods Crosshair 3-PIN DT Plug Switch 40A

Applications

For maXpeedingrods Crosshair Series LED Auxiliary Driving Lights with RGB (3.5inch / 5inch / 7inch models). It supports the following application scenarios:

1. Simultaneous control of A-pillar lights: 2 pairs of A-pillar lights (3.5-inch/5-inch) are both acceptable
2. 1 pair of A-pillar lights + 1 pair of front bumper lights (3.5-inch/5-inch A-pillar lights are both acceptable, 5-inch/7-inch front bumper lights are both acceptable)
With a 1-to-4 configuration, this harness can manage up to four lights concurrently, and its load capacity is sufficient to support one pair of 7-inch front bumper lights and one pair of 5-inch A-pillar lights.

Specifications

Operating Voltage: 10-14V
Maximum Current: 40A
Relay: 60A
Maximum Power: 480W/12V
Plug Type: 3-PIN DT Plug
Plugs Quantity: 4
Switch Type: Touch
Material: High Quality PVC + Copper Wire
Wire Harness Length: 3M+0.9M*2（Y Type Extension Wire）
Power Supply Way: ACC
 

Feature
* The professionally assembled wiring harness switch more convenient to use，it can simultaneous control 4 maXpeedingrods Crosshair series RGB off-road lights ,7inch、5inch and 3.5inch all satisfy the requirement.
* Easy to install: Simply plug the matching off-road light DT plug into  the DT plug of the wiring harness，no need to DIY.
* The wiring harness kit made of high quality copper and PVC, equip with relays and high current fuses, which are more safe 、reliable and durable.
* The wiring harness with a total length of about 4m is flexible for mounting anywhere you want.

Package Included
1* Wiring Harness Kit

Note
* Please finish the installation by professionals or install the wiring harness under the guidance of professionals.
* Pay attention to the working voltage range during installation and ensure that the current passing through does not exceed the rated current.
* Does not include an instruction manual.