433.92MHz Remote Control Compatible with V2, 2 Channels Remote Control for V2 PHOX 2/PHOX 4, Handy 2/Handy 4, Phoenix 2/Phoenix 4, TXC4, TRC4, TSC4 (2 pieces)

COMPATIBILITY - This garage door remote is compatible with V2 PHOENIX 2, V2 PHOENIX 4, V2 PHOX 2, V2 PHOX 4, V2 TXC, V2 TRC, V2TSC4, V2 HAND. 2 CHANNELS - The remote has 2 channels to open gates and garage doors with a single command, allowing for efficient control of door automation. USER MANUAL - The remote comes with a user manual that allows for quick and easy programming and troubleshooting. FREQUENCY - Please ensure your original remote has a frequency of 433.92MHz. QUALITY CUSTOMER SERVICE - Please feel free to contact us if you encounter any problems after purchasing the remote. Note: Your remote must match the picture and your remote model must be listed above. COMPATIBILITY - This garage door remote is compatible with V2 PHOENIX 2, V2 PHOENIX 4, V2 PHOX 2, V2 PHOX 4, V2 TXC, V2 TRC, V2TSC4, V2 HAND2 CHANNELS - The remote control has 2 channels to open gates and garage doors with a single command, allowing for efficient control of gate automation. USER MANUAL - The remote control comes with a user manual that allows for quick and easy programming and troubleshooting. FREQUENCY - Please ensure your original remote control has a frequency of 433.92MHz. QUALITY CUSTOMER SERVICE - Please feel free to contact us if you experience any problems after purchasing the remote control. Description: Programming Type: Programming with receiver Button: 2 buttons Frequency: 433.92 MHz Battery: Built-in battery Range: 10m-50m (open space) Material: Metal and ABS Code: Rolling code Access to the receiver is required. Make sure you have access to the receiver/opening before purchasing.

If your original remote is not listed, please do not purchase it.

How is programming done?

1. Clear the code

Press buttons A and B simultaneously. The LED indicator will flash three times and then turn off. Next, press and hold A and release button B, then press button B three times. The LED indicator on the duplicator will flash rapidly, indicating that it has successfully cleared the existing code. You can now proceed to the next step to copy.

2. Copy the original remote

Please bring the original remote and the duplicator as close as possible to you. Then, simultaneously press one of the buttons on the original remote and one of the buttons on the duplicator.

You will see the LED indicator flash twice and then rapidly; this indicates that you have successfully copied the original remote control. 3. Restore What if you accidentally delete the code you copied? Don't worry, you can simultaneously press the last two buttons, C and D. The LED will flash three times and then rapidly, and the recovered code can still be used.