433 MHz remote control for garage doors – 2-pack, compatible with N1ce ONE1, ON1, ON2E, FLO2R-S, FLO2RE

【Garage Door Remote Control】This is a replacement part and not an original accessory. We recommend checking the device compatibility list below before purchasing. Please check this carefully before buying (see the remote control pairing instructions in the receiver's user manual).
【Frequency】Ensure your original remote control operates at a frequency of 433 MHz for optimal compatibility.
【Easy Operation with Instructions】Instructions are included, and operation is simple. Lightweight and easy to carry, it can also be attached to your backpack as a decoration.
【Customer Support】Our competent customer support team is happy to assist you with any questions or problems.

Technical Specifications:

- Type: Programmable with Receiver

- Frequency: 433.92 MHz

- Code: Fixed Code

- Battery: Built-in Battery

- Buttons: 2

Model: YNG101 / YNG122 / YNG138

Compatible Models

N1ce FLO1R-S/FLO2R-S/FLO4R-S

ON1/ON2/ON4

ON1E/ON2E/ON4E

FLO1RE/FLO2RE/FLO4RE

VERY/VR

ERA INTI1/ERA INTI2

NOTE - Manual - Manual

1. Please ensure your original remote control is working perfectly before purchasing, as cloning is required.

2. If you have lost your original remote control, please do not purchase this product. Thank you.

PROGRAMMING

Locating the DLP Switch

Open the motor cover of your garage door opener or remote and locate the DLP switch (usually inside the motor or remote).

Mapping Switch Positions

1. Open the casing of the new remote and locate the DLP switches.

2. Set the DLP switches on the new remote to the exact same position as on the old remote (or receiver).

3. Pairing is complete.