433.92MHz Gate Remote Control - 3 Pack 4 Channel Rolling Code Compatible with King Gates Stylo 4K

Compatibility: This garage door remote is only compatible with the King Gates Stylo 4K 433.92 MHz remote. Ensure your original remote operates at a frequency of 433.92 MHz. Replacement Remote: This remote must be an identical copy of your original remote. Ensure your original remote is fully functional, otherwise it cannot be programmed. 4-Channel Remote: This remote has 4 buttons to control up to 4 garage door openers. High-Quality Customer Service: Please contact us if you experience any problems after purchasing the remote. Please ensure your original remote is fully functional, otherwise it cannot be programmed. 4-Channel Remote: This remote has 4 buttons to control up to 4 garage door openers. High-Quality Customer Service: If you experience any problems after purchasing the remote, please contact us.

Product Details:

• Frequency: 433.92 MHz.
• Remote Control Buttons: 4
• Battery Type: CR2032 (built-in)
• Range: 50–150 meters (outdoors)
• Programming Type: Rolling Code Remote Control

Compatibility:

• Compatible with King Gates Stylo 4K

Important Notes:

• Remote controls of other brands, models, and frequencies are NOT supported.

Programming the Remote Control

• 1. Materials required for programming: Open the receiver from the garage door.
• 2. Press the programming button.
• 3. On some receivers, you may need to press and hold the programming button. 4. The LED on the receiver will indicate that programming mode has started. 5. Press and hold a button on the new remote control for one second, then release it. 6. The LED on the receiver will light up or turn off to indicate successful programming. 7. Wait a few seconds to exit programming mode. Programming is complete.