Door Remote Control Clone Key, 433.9MHz 433.9MHz Universal Wireless Remote Control Clone Key with 4 Buttons for Garage Car

Use 4 Different Ways at the Same Time: The 433MHz wireless remote control is designed with 4 buttons to copy four different ways, one remote control can take advantage of four different installation ways.

Multiple Functions: Remote control key FOB, convenient for automotive, garage doors, gates, light doors, car/motorcycle alarms, home security products and more.

Design: This anti remote control volume duplicate has a beautiful shape, signal strength for transmission, button and metal shell.

Fixed Frequency: The universal cloning control is suitable for 433MHz, and the transmission distance is between 50-100m outside the door.

Note: This cloning remote control cannot clone 433MHz telecommand without the need for the rotation code or MEGA code. Check your original remote control type before Commander.

Description:

There are 4 buttons each on the remote control key fobs, which can help you control the devices precisely. The remote control key fob is suitable for doors, short-range wireless remote control products, electrical appliances/home automation lamps, industrial control products, etc.

Note:

Please note the following points before ordering. This universal remote control is only compatible with 433MHz (433.92MHz) frequencies, not suitable for 315MHz, scrolling code or CI modes.

Please check if your original remote control or garage door system is 433MHz before purchasing.

Note: Remote control chips are only compatible with the following chips, other chip types are not supported, please confirm your original chip model before placing an order.

Compatible Chips: 2260 (such as PT2260, SC2260, LX2260, HX2260, etc.). 2262 (such as PT2262, SC2262, HS2262, HX2262, etc.). PT2264, PT2240 (LX2240), CS5211, 1527 (EV1527, HX1527). SMC918, AX5026, SMC926, AX5326-3, AX5326-4, HT600, HT680, HT6207 . HT6010 \ HT6012 \ HT6013 \ HT6014 \ HT12D \ HT46F49E \ PIC16F630 . HCS101, HCS200\ HCS201 (some of them, not all of them), HCS300\ HCS301 (some of them, not all of them).

How to use:

With the original remote in one hand and the copy remote in the other. The two remote controls should be as close to each other as possible. (The two remote controls should be placed on the desk while leaning against each other and not spaced apart.)

Press the required buttons respectively. The LED indicator will flash 3 times quickly and then quickly. The code matching is successful.

Note:

1. Some remote controls have low transmission power, so you should be equipped with the original remote control and copy the back-to-back operation of the remote control.

2. If there is interference, you should avoid it during operation.

3. If the result is not good, repeat the fight after clearing the