Door Remote Control Clone Keys 433.9MMHz 433.9MHz Universal Wireless Remote Control Clone Keys with 4 Buttons for Garage Car

Utilisez 4 types différents simultanément: touche télécommande sans fil 433MHz est conçue avec 4 boutons pour copier quatre types de puces différents..Une télécommande peut donc exploiter quatre types d'installations différents.

Fonction mulit: clé de commande à distance FOB convient aux automobiles, portes de garage, portes, puits de lumière, alarmes de voiture / moto, produits de sécurité à domicile et plus.

Conception: ce duplicateur de télécommande d'anti-vol électrique a une belle forme, un fort signal de transmission, un bouton et une coque métallique.

Fréquence fixe: télécommande de clonage universelle ne convient que 433 MHz et distance de transmission est de 50 à 100 m à l'Eréa ouverte.

Remarque: cette touche de télécommande de clonage ne peut cloner que télécommande 433 MHz et ne prend pas en charge le code de rotation ou le code MEGA..Veuillez vérifier votre type de télécommande d'origine avant de commander.

Description:

There are 4 buttons one each of the remote control key fobs, which can help you control the devices precisely. The remote control key fob is suitable for door, short-distance wireless remote control products, electrical appliances/home automation lamps, industrial control products, etc.

Note:

Please pay attention to the following points before placing an order. This universal remote control is only compatible with 433MHz (433.92MHz) frequencies and is not suitable for 315MHz, scrolling code or CI modes.

Please check whether your original remote control or garage door system is 433MHz before purchase.

Note: remote control chips are only compatible with the following chips, other types of chips are not supported, please confirm your original chip model before placing an order.

Compatible chips: 2260 (such as PT2260, SC2260, LX2260, HX2260, etc.). 2262 (e.g. PT2262, SC2262, HS2262, HX2262, etc.). PT2264, PT2240 (LX2240), CS5211, 1527 (EV1527, HX1527). SMC918, AX5026, SMC926, AX5326-3, AX5326-4, HT600, HT680, HT6207. HT6010 \ HT6012 \ HT6013 \ HT6014 \ HT12D \ HT46F49E \ PIC16F630 . HCS101, HCS200\ HCS201 (some of them, not all), HCS300\ HCS301 (some of them are not all).

How to use:

With the original remote control in one hand and the copy remote controller in the other, the two remote controls should be as close as possible. (the two remote controllers should be placed on the desktop while leaning against each other at zero distance)

Press the required keys respectively. The LED indicator flashes quickly 3 times and then flashes quickly. The code matching is successful.

Note:

1. Some remote controls have low transmission power, so they should be equipped with the original remote control and copy the remote control back-to-back operation.

2. If there is interference, you should avoid it during operation.

3. If the result is not good, rematch after clearing the