433Mhz High Power Wireless Remote Control Switch, AC 220V/240V/110V 30A RF Remote Control for Light, Water Pump, Household Appliances, Agricultural Irrigation

describe

Unique design: 433MHz RF wireless remote control switch. Stable and reliable performance, receiving sensitivity (>-105dBm). Strong signals can pass through walls, floors and doors. It can pass through walls, floors and doors to control the receiver from any place within a reliable distance.

Easy to use: Very easy to set up and reset. There are 3 working modes (momentary/switch/latching mode) to choose from. You can easily set up the working mode of the product yourself according to your needs. The project has been set to latched mode. The ON button lights up and the OFF button turns off.

High sensitivity: The receiver uses a 30A relay, which can load high-power electrical appliances and ensure long-term stable control. Each receiver can store about 20 transmitters. And one transmitter can also control multiple receivers (the transmitter must match the receiver).

High quality: High-power terminals can withstand 30A current and can work normally even if the current is unstable. The applicable voltage of the receiver is 85V~240V, making it more flexible to use.

Wide application: The products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely control each device connected to the repeater receiver through the remote control. Such as lights, water pumps, wireless security alarms, fans, lamps, ventilation devices, monitors, printers, fountains and other electrical equipment.

Security system: The chip code is EV1527 learning code, which is currently the most popular technology and makes the remote control system more stable.

Strong signal reception: There is an antenna on the receiver that can be stretched by itself to achieve a stronger signal receiving distance, and the remote control distance can reach 50 meters.

More flexible: Very easy to set up and reset. You can easily add additional wireless switches by yourself according to your needs.

Product parameters

AC 85V ~ 265V 30A

Voltage: AC 85V ~ 265V.

Maximum current: 30A

RF frequency: 433MHz

Supported coding: learning code 1527

Receiving sensitivity: >97dBm

RF working mode: ASK superheterodyne wireless receiving

Working temperature: -30℃ ~ +80℃

Receiving range: more than 50 meters in open space

Quiescent current: <5MA

Locking mode

Press the ON button, the relay is closed; press the OFF button, the relay is closed.

Comfortable

Press the learning button (located on the receiver) 3 times. Wait for 3 seconds;

Press the ON button on the remote control. Wait for 3 seconds.

Press the OFF button on the remote control. success.